Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Volvo XC90 Base, AWDFACTORY OEM SERVICE PROCEDURE
Test Sequence
| Procedure | Expected result | Remarks |
| 1. Insert the key and turn on the ignition. | The lighting in the screen's button illuminates and the system is set to standby mode. | |
| 2. Activate the DVD device on the driver's side using the remote control by first pressing and then. | Only the DVD device on the driver's side is activated and the Volvo emblem appears on the screen. | If the DVD device on the passenger side is activated, the DVD device must be recoded. See: DESIGN - Service menu for changing DRIVER/PASSENGER settings |
| 3. Activate the DVD device on the passenger side using the remote control by first pressing and then. | Only the DVD device on the passenger side is activated and the Volvo emblem appears on the screen. | If the DVD device on the driver's side is activated, the DVD device must be recoded. See: DESIGN - Service menu for changing DRIVER/PASSENGER settings |
| 4. Ensure that the correct DVD region is coded in. This is done manually on each DVD device. | See: DESIGN - Changing the region code in the DVD device | |
| 5. Ensure that the system is in standby and then switch off the ignition. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
