2012 Volvo XC90 Base, AWDFACTORY OEM SERVICE PROCEDURE

Lock Unit, Tailgate/Trunk Lid

Fig 1: Tailgate/Trunk Lid Lock Unit
GLL148510Courtesy of VOLVO CARS CORPORATION

The lock unit in the tailgate locks and unlocks during a normal locking procedure. When the tailgate is unlocked and the handle on the tailgate is pressed the catch in the mechanism from the lock brace in the body disengages and the tailgate opens.

There is a lock cylinder on the tailgate on the XC90 if a third row of seats was fitted at the factory.

The tailgate/trunk lid can also be unlocked/opened separately with a special button on the remote control.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.