2012 Volvo XC70 T-6FACTORY OEM SERVICE PROCEDURE

Closing Velocity Module (CVM) DTCS

CLOSING VELOCITY MODULE (CVM) - DTC INDEX

DTC Volvo Code Description
U0001 CVM-U000100 High Speed CAN Communication Bus. General Failure Information. No sub type information
U0028 CVM-U002800 Vehicle Communication Bus A. General Failure Information. No sub type information
U0100 CVM-U010000 Lost Communication With Engine control module. General Failure Information. No sub type information
U0121 CVM-U012100 Lost Communication With Brake Control Module. General Failure Information. No sub type information
U0126 CVM-U012600 Lost Communication With Steering Angle Sensor Module. General Failure Information. No sub type information
U0140 CVM-U014000 Lost Communication With Central electronic module. General Failure Information. No sub type information
U0300 CVM-U030000 Internal Control Module Software Incompatibility. General Failure Information. No sub type information
U0300 CVM-U03004A Internal Control Module Software Incompatibility. System Internal Failures. Incorrect component installed
U0401 CVM-U040168 Invalid Data Received From Engine control module. Algorithm Based Failures. Event information
U0415 CVM-U041568 Invalid Data Received From Brake control module. Algorithm Based Failures. Event information
U0424 CVM-U042468 Invalid Data Received From HVAC Control Module. Algorithm Based Failures. Event information
U0428 CVM-U042868 Invalid Data Received From Steering Angle Sensor Module. Algorithm Based Failures. Event information
U1A14 CVM-U1A1449 CAN Initialization Failure. System Internal Failures. Internal electronic failure
U2100 CVM-U210000 Control Module Not Configured. General Failure Information. No sub type information
U2101 CVM-U210100 Control Module Configuration Incompatible. General Failure Information. No sub type information
U3000 CVM-U300000 Control Module. General Failure Information. No sub type information
U3000 CVM-U300064 Control Module. Algorithm Based Failures. Signal plausibility failure
U3000 CVM-U300066 Control Module. Algorithm Based Failures. Signal has too many transitions/events
U3003 CVM-U300362 Battery Voltage. Algorithm Based Failures. Signal compare failure
Chapter Navigation
Return to Chapter: DTC Index
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.