2012 Volvo C70FACTORY OEM SERVICE PROCEDURE

Power Seat Module, Left (PSL) And Power Seat Module, Right (PSR) (2006-2013): Function: "Easy-Entry"

Fig 1: Identifying "Easy-entry"
GLL158665Courtesy of VOLVO CARS CORPORATION

The "easy-entry" function facilitates passenger entry to the vehicle's rear seats. This is operated using a switch that is located on the upper side's outer edge of the front seats. When using this function the motors are activated that control the movement of the seats, front-rear and up/down. The seat is then moved forwards and downwards to facilitate entry to the rear seats.

WARNING:

There must not be anybody sitting in the seat when easy-entry is operated.

Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.