2011 Volvo XC90 R-Design, FWDFACTORY OEM SERVICE PROCEDURE

Infotainment Control Module (ICM) DTCS

INFOTAINMENT CONTROL MODULE (ICM) - DTC INDEX

DTC Description
ICM-1A02 Control module. Faulty voltage
ICM-1A51 Communication with the audio module (AUD). Signal missing
ICM-1A53 Communication with the multimedia module (MMM). Signal missing
ICM-1A54 Communication with the Subwoofer module (SUB). Signal missing
ICM-1A57 Communication with the phone module (PHM). Signal missing
ICM-1A58 Communication with the Global positioning system module (GPS). Signal missing
ICM-1A5A Communication with integrated audio module (IAM). Signal missing
ICM-1A5B Communication with Remote Digital Audio Receiver (RDAR) Signal missing
ICM-1A5C Communication with bluetooth phone module (BPM) Signal missing
ICM-1A5D Communication With Accessory USB Unit (AUU) Signal missing
ICM-1D01 Control module. Internal fault
ICM-1D03 Control module, not fully programmed. Internal fault
ICM-1D07 Control module. Internal fault
ICM-1D08 Control module. Internal fault
ICM-1F20 Left keypad. Activated too long
ICM-1F21 Left-hand keypad circuit 1. Signal too high/too low
ICM-1F22 Left-hand keypad circuit 2. Signal too high/too low
ICM-1F23 Left-hand keypad circuit 3. Signal too high/too low
ICM-1F24 Left-hand keypad circuit 4. Signal too high/too low
ICM-1F25 Right-hand keypad circuit 5. Signal too high/too low
ICM-1F26 Right keypad. Activated too long
ICM-1F27 Right-hand keypad circuit 1. Signal too high/too low
ICM-1F28 Right-hand keypad circuit 2. Signal too high/too low
ICM-1F29 POWER button. Signal too high/low
ICM-1F30 POWER button. Activated too long
ICM-1F31 SOUND button. Activated too long
ICM-1F32 VOLUME knob. Signal missing
ICM-1F33 SELECTOR knob. Signal missing
ICM-1F34 VOLUME knob. Faulty signal
ICM-1F35 SELECTOR knob. Faulty signal
ICM-1F36 Display heater. Faulty voltage
ICM-1F38 Display Temperature Sensor Faulty Voltage
ICM-6C71 Audio module (AUD) not approved. Faulty signal
ICM-6C72 Multimedia module (MMM) not approved. Faulty signal
ICM-6C73 Subwoofer module (SUB) not approved. Faulty signal
ICM-6C76 Phone module (PHM) not approved. Faulty signal
ICM-6C77 Global Positioning Module (GPS) not valid. Faulty signal
ICM-6C79 Infotainment control module (ICM) not valid. Faulty signal
ICM-6C7A Integrated audio module (IAM) not valid. Faulty signal
ICM-6C7B Remote Digital Audio Receiver (RDAR) not valid Faulty signal
ICM-6C7C Bluetooth phone module (BPM) not valid Faulty signal
ICM-6C7D Accessory USB Unit (AUU) not valid Faulty signal
ICM-DC00 Control module communication. Internal fault
ICM-DC01 Control module communication. Faulty signal
ICM-DC02 Control module communication. Signal missing
ICM-E001 Control module communication. Internal fault
ICM-E003 Configuration fault. Software fault
ICM-E010 Power supply. Signal too low
ICM-XXXX Unknown diagnostic trouble code (DTC) for the current control module version
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.