2011 Volvo XC90 R-Design, AWDFACTORY OEM SERVICE PROCEDURE

Rear Electronic Module (Rem) DTCS

REAR ELECTRONIC MODULE (REM) - DTC INDEX

DTC Description
REM-1D01 Control module. Internal fault
REM-1D02 Control module. Internal fault
REM-1D03 Control module, not fully programmed Internal fault
REM-1D07 Control module. Internal fault
REM-1D08 Control module. Internal fault
REM-1D0A Control module. Internal fault
REM-1F8C Trailer foglight driver, signal or temperature too high
REM-4A40 Gas temperature sensor. Signal too high
REM-4A41 Gas temperature sensor. Signal too low
REM-4A42 Gas pressure sensor. Signal too high
REM-4A43 Gas pressure sensor. Signal too low
REM-4A44 Fuel level, gas. Faulty signal
REM-4A45 Fuel level, gas. Signal too high
REM-4A46 Fuel level, gas. Signal too low
REM-4A47 Fuel level, gas. Signal too low
REM-4A48 Fuel level, gas. Signal too high
REM-4F42 Parking sensor 1. Faulty signal
REM-4F43 Parking sensor 2. Faulty signal
REM-4F44 Parking sensor 3. Faulty signal
REM-4F45 Parking sensor 4. Faulty signal
REM-4F46 Parking sensor 5. Faulty signal
REM-4F47 Parking sensor 6. Faulty signal
REM-4F48 Parking sensor 7. Faulty signal
REM-4F49 Parking sensor 8. Faulty signal
REM-4F4A Parking assistance module (PAM). Faulty signal
REM-6A01 Switch, central locking motor. Signal too high
REM-6A02 Switch central locking motor. Signal too high
REM-6A03 Switch central locking motor. Signal too low
REM-6A04 Switch central locking motor. Signal too low
REM-6A05 Switch locking motor child-proof lock. Faulty signal
REM-6A06 Switch locking motor child-proof lock. Faulty signal
REM-6A07 Power child lock motor switch. Faulty signal
REM-6A08 Power child lock motor switch. Faulty signal
REM-6A09 Power child lock motor switch. Faulty signal
REM-6A0A Power child lock motor switch. Faulty signal
REM-6A10 Door switch. Signal too high
REM-6A11 Door switch. Signal too high
REM-6A12 Door switch. Signal too high
REM-6A13 Door switch. Signal too high
REM-6A14 Hood switch. Signal too high
REM-6A15 Switch, tailgate. Signal too high
REM-6C11 Tilt sensor. Signal too high
REM-6C12 Tilt sensor. Signal too low
REM-6C15 Tilt sensor. Communication fault
REM-6C16 Tilt sensor. Internal fault
REM-6C17 Glass break wire. Signal missing
REM-6C18 Glass break wire. Signal too high
REM-6F51 Tailgate handle. Signal too low
REM-7A20 Subwoofer X-feed, signal or temperature too high
REM-8B01 Parking lamps right. Signal too low
REM-8B11 Parking lamps left. Signal too low
REM-8B21 License plate lighting. Signal too low
REM-8C21 Rear fog lamp. Signal too low
REM-8D11 High level stop lamp. Signal too low
REM-8D12 High level stop lamp. Signal too high
REM-8F10 Position sensor xenon lamp. Signal too high
REM-8F11 Xenon lamp position sensor. Signal too low
REM-8F12 Xenon lamp position sensor. Not calibrated
REM-8F13 Position sensor xenon lamp. Calibration fault
REM-9F21 Cargo compartment lighting. Signal too low
REM-DD00 LIN communication. Communication fault
REM-DD01 LIN communication. Communication fault
REM-DD02 LIN communication. Communication fault
REM-DD10 LIN communication. Communication fault
REM-DD20 Level sensor alarm. Communication fault
REM-DD21 Level sensor alarm. Faulty signal
REM-E001 Control module communication. Defective communication
REM-E003 Configuration fault. Faulty configuration
REM-E010 Power supply control module. Signal too low
REM-XXXX Unknown diagnostic trouble code (DTC) for the current control module version
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.