2011 Volvo S60FACTORY OEM SERVICE PROCEDURE

Controlling The Generator

GLL1040032Courtesy of VOLVO CARS CORPORATION

The engine control module (ECM) (4/46) regulates the charge voltage of the generator (GEN) (via LIN communication) when requested by the central electronic module (CEM) (4/56) (via CAN communication).

The engine control module (ECM) can change the charge voltage requested by the central electronic module (CEM). to suit certain operating conditions such as engine start, idle speed or high engine load.

The value requested by the engine control module (ECM) for charging voltage and alternator charging current can be read using the diagnostic tool.

The alternator control module (ACM) transmits fault information to the engine control module (ECM). Diagnostic trouble codes (DTCs) are stored in the engine control module (ECM).

For further information about generator (GEN) control, see DESIGN AND FUNCTION, GENERATOR (GEN) and DESIGN AND FUNCTION, CENTRAL ELECTRONIC MODULE (CEM) .

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.