Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Activating And Deactivating VOLVO On Call
Software can also be downloaded to activate or deactivate the Volvo On Call function. This requires a PIN code to be retrieved from the Volvo central database. The menu can also be used to activate and deactivate the functionality. Instructions and the PIN code for this are on the Volvo On Call website. If necessary, for example if Volvo On Call is being misused, the network operator is also able to cancel the subscription for the internal SIM card for Volvo On Call. After Volvo On Call functionality is activated, the same information applies in terms of searching for GPS satellites and the connection of a voice call to the Volvo On Call Service Center.
If the Volvo On Call function is activated, a text message will indicate this to the user. The text message is displayed in the driver information module (DIM) at the start of each operating cycle (key position I).
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.