Description Of Programmable Parameters, Customer Adaptation

The system can be adapted to the wishes of the customer in a variety of ways. Most importantly, the customer is able to select the order in which the doors are unlocked from four different settings:

• Total unlocking:  All doors and the tailgate or trunk lid are unlocked if a handle is pulled out or the unlock button for the tailgate or trunk lid is pressed as long as there is a valid key at that door
• Selective unlocking, one of the front doors:  The vehicle can only be unlocked using the handle on one of the front doors if there is a key at that door. The front door on which the handles was pulled unlocks and opens. The other doors must be opened using the remote control or using the central locking switch inside the vehicle. If the handle for the tailgate is used, only the tailgate will unlock and open
• Selective unlocking: both front doors:  The vehicle can only be unlocked using the handle on one of the front doors if there is a key at that door. The front door on which the handles was pulled unlocks and opens. The other front door unlocks. The other doors must be unlocked using the remote control or using the central locking switch inside the vehicle. If the handle for the tailgate is used, only the tailgate will unlock and open

The setting can be changed at the workshop using VIDA (Volvo scan tool). The customer can change the setting themselves if the car has an infotainment control module (ICM). If the customer changes the setting, this setting is transmitted by the infotainment control module (ICM) to the keyless vehicle module (KVM) on the controller area network (CAN). The default setting when the vehicle is supplied is stored in the central electronic module (CEM).