Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Volvo C30 R-Design, StandardFACTORY OEM SERVICE PROCEDURE
Driver Door Module/Passenger Door Module (DDM/PDM) DTCS
DRIVER DOOR MODULE/PASSENGER DOOR MODULE (DDM/PDM) DTCS - DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| Volvo Code | Description |
| DDM/PDM-0002 | Central Locking Button. Stuck In The Active Position |
| DDM/PDM-0003 | Central Locking Button, Unlocking. Stuck In The Active Position |
| DDM/PDM-0010 | Control Panel. Open-Circuit |
| DDM/PDM-1000 | Control Module. Internal Fault |
| DDM/PDM-6C02 | Central Locking Motor M1. Stuck In The Active Position |
| DDM/PDM-6C03 | Central Locking Motor M1. Stuck In The Inactive Position |
| DDM/PDM-6C05 | Central Locking Motor M2. Stuck In The Active Position |
| DDM/PDM-6C06 | Central Locking Motor M2. Stuck In The Inactive Position |
| DDM/PDM-6C08 | Central Locking Motor M3. Stuck In The Active Position |
| DDM/PDM-6C09 | Central Locking Motor M3. Stuck In The Inactive Position |
| DDM/PDM-6D01 | Power Window Mechanism. Internal Fault |
| DDM/PDM-6D02 | Power Window Up Relay. Stuck In The Active Position |
| DDM/PDM-6D03 | Power Window Up Relay. Stuck In The Inactive Position |
| DDM/PDM-6D04 | Power Window Down Relay. Stuck In The Active Position |
| DDM/PDM-6D05 | Power Window Down Relay. Stuck In The Inactive Position |
| DDM/PDM-6D0C | Control Module. Internal Fault |
| DDM/PDM-6D0D | Control Module. Internal Fault |
| DDM/PDM-6E0A | Mirror Motor. Short-Circuit To Supply Voltage |
| DDM/PDM-6E0B | Mirror Motor. Short-Circuit To Ground |
| DDM/PDM-6E0C | Mirror Motor. Open-Circuit |
| DDM/PDM-6E41 | Position Sensor, Mirror. Short-Circuit To Supply Voltage/Open-Circuit |
| DDM/PDM-6E42 | Position Sensor, Mirror. Short-Circuit To Ground |
| DDM/PDM-6E43 | Position Sensor, Mirror. Short-Circuit To Supply Voltage/Open-Circuit |
| DDM/PDM-6E44 | Position Sensor, Mirror. Short-Circuit To Ground |
| DDM/PDM-6E45 | Power Supply. Open-Circuit |
| DDM/PDM-8010 | Mirror Lamp. Short-Circuit To Supply Voltage |
| DDM/PDM-8011 | Mirror Lamp. Short-Circuit To Ground |
| DDM/PDM-8012 | Mirror Lamp. Open-Circuit |
| DDM/PDM-E003 | Configuration Fault. Faulty Communication |
| DDM/PDM-E010 | Control Module. Internal Fault |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.