Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Volvo C30 R-Design, AutomaticFACTORY OEM SERVICE PROCEDURE
Driver Door Module And Passenger Door Module Diagnostic Trouble Codes
- DDM/PDM-0002 Central Locking Button. Stuck In The Active Position
- DDM/PDM-0003 Central Locking Button, Unlocking. Stuck In The Active Position
- DDM/PDM-0010 Control Panel. Open-Circuit
- DDM/PDM-1000 Control Module. Internal Fault
- DDM/PDM-6C02 Central Locking Motor M1. Stuck In The Active Position
- DDM/PDM-6C03 Central Locking Motor M1. Stuck In The Inactive Position
- DDM/PDM-6C05 Central Locking Motor M2. Stuck In The Active Position
- DDM/PDM-6C06 Central Locking Motor M2. Stuck In The Inactive Position
- DDM/PDM-6C08 Central Locking Motor M3. Stuck In The Active Position
- DDM/PDM-6C09 Central Locking Motor M3. Stuck In The Inactive Position
- DDM/PDM-6D01 Power Window Mechanism. Internal Fault
- DDM/PDM-6D02 Power Window Up Relay. Stuck In The Active Position
- DDM/PDM-6D03 Power Window Up Relay. Stuck In The Inactive Position
- DDM/PDM-6D04 Power Window Down Relay. Stuck In The Active Position
- DDM/PDM-6D05 Power Window Down Relay. Stuck In The Inactive Position
- DDM/PDM-6D0C Control Module. Internal Fault
- DDM/PDM-6D0D Control Module. Internal Fault
- DDM/PDM-6E0A Mirror Motor. Short-Circuit To Supply Voltage
- DDM/PDM-6E0B Mirror Motor. Short-Circuit To Ground
- DDM/PDM-6E0C Mirror Motor. Open-Circuit
- DDM/PDM-6E41 Position Sensor, Mirror. Short-Circuit To Supply Voltage/Open-Circuit
- DDM/PDM-6E42 Position Sensor, Mirror. Short-Circuit To Ground
- DDM/PDM-6E43 Position Sensor, Mirror. Short-Circuit To Supply Voltage/Open-Circuit
- DDM/PDM-6E44 Position Sensor, Mirror. Short-Circuit To Ground
- DDM/PDM-6E45 Power Supply. Open-Circuit
- DDM/PDM-8010 Mirror Lamp. Short-Circuit To Supply Voltage
- DDM/PDM-8011 Mirror Lamp. Short-Circuit To Ground
- DDM/PDM-8012 Mirror Lamp. Open-Circuit
- DDM/PDM-E003 Configuration Fault. Faulty Communication
- DDM/PDM-E010 Control Module. Internal Fault
- DDM-0012: Control, Driver's Window. Stuck In The Active Position
- DDM-0013: Control, Passenger Window. Stuck In The Active Position
- DDM-0020: Control, Door Mirror. Stuck In The Active Position
- DDM-0022: Control, Door Mirror Selector. Stuck In The Active Position
- DDM-0024: Central Locking Switch. Faulty Signal
- DDM-0025: Led, Camera Module Signal Too Low
- DDM-0026: Led, Camera Module Signal Too High
- DDM-0027: Led, Camera Module Open Circuit
- DDM-002B: Camera Module Internal Failure
- DDM-002F: Camera Module Voltage Supply Signal Too Low
- DDM-003A: Camera Module Voltage Supply Signal Too High
- DDM-6E01: Mirror Motor. Shorted To Supply
- DDM-6E02: Mirror Motor. Ground (GND) Short
- DDM-6E03: Mirror Motor. Open Circuit
- DDM-6E04: Mirror Motor. Shorted To Supply
- DDM-6E05: Mirror Motor. Ground (GND) Short
- DDM-6E06: Mirror Motor. Open Circuit
- DDM-6E07: Mirror Motor. Shorted To Supply
- DDM-6E08: Mirror Motor. Ground (GND) Short
- DDM-6E09: Mirror Motor. Open Circuit
- DDM-8002: Mirror Heater. Ground (GND) Short
- DDM-8003: Mirror Heater. Shorted To Supply
- DDM-8021: Side Turn Indicator. Ground (GND) Short
- DDM-8022: Side Turn Indicator. Open Circuit
- DDM-Dd11: Communication With Switch Pack Internal Fault
- DDM-Dd20: Lin Communication Camera Module Internal Fault
- DDM-Dd21: Lin Communication Camera Module Shorted
- DDM-Dd22: Lin Communication Camera Module Internal Fault
- DDM-Dd30: Communication With Camera Module Internal Fault
- DDM-E001: Control Module Communication. Faulty Communication
- DDM-XXXX: Unknown Diagnostic Trouble Code (DTC) For The Current Control Module Version
- PDM-0012: Control, Passenger Window. Stuck In The Active Position
- PDM-0024: Central Locking Switch. Faulty Signal
- PDM-0025: Led, Camera Module Signal Too Low
- PDM-0026: Led, Camera Module Signal Too High
- PDM-0027: Led, Camera Module Open Circuit
- PDM-002B: Camera Module Internal Failure
- PDM-002F: Camera Module Voltage Supply Signal Too Low
- PDM-003A: Camera Module Voltage Supply Signal Too High
- PDM-Dd20: Lin Communication Camera Module Internal Fault
- PDM-Dd21: Lin Communication Camera Module Shorted
- PDM-Dd22: Lin Communication Camera Module Internal Fault
- PDM-Dd30: Communication With Camera Module Internal Fault
- PDM-XXXX: Unknown Diagnostic Trouble Code (DTC) For The Current Control Module Version
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.