Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Activating And Deactivating VOLVO On Call
It is also possible to activate or deactivate the Volvo On Call function by downloading software. The security access code must be retrieved from the Volvo central database. It is also possible to activate/deactivate the functionality via menu management. The instructions and activation code for this are available at the Volvo On Call ' web site. If necessary (misuse of Volvo On Call for example) the network operator can cancel the subscription of the internal SIM card for Volvo On Call. After activation of the Volvo On Call functionality the same applies as for replacing a control module as regards searching for GPS satellites and connecting calls to the Volvo On Call Service Center.
If the Volvo On Call functionality is deactivated, the user will be informed by text message. The text message will be displayed in the driver information module (DIM) at the start of every driving cycle (ignition switch position ON).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.