Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Pressure Reducing Valve
The pressure reducing valve is located in the Differential electronic module (DEM).
The pressure reducing valve receives a constant pulse width modulated (PWM) signal from the control module. The control signal from the control module changes the position of the pressure reducing valve. This regulates the pressure to the discs' operating piston.
In case of diagnostics failure of the pressure reducing valve, four-wheel drive is lost.
The pressure reducing valve can be diagnosed.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.