Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2009C30 R-DESIGN, AUTOMATICREPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXINTEGRATED AUDIO MODULE (IAM) DTCS
2009 Volvo C30 R-Design, Automatic
Integrated Audio Module (IAM) DTCS
2009 Volvo C30 R-Design, AutomaticSECTION Integrated Audio Module (IAM) DTCS
INTEGRATED AUDIO MODULE (IAM) - DTC INDEX
| Volvo Code | Description |
|---|---|
| IAM-1001 | AM/FM antenna. No signal |
| IAM-1002 | AM/FM antenna. Faulty signal |
| IAM-2001 | Control module. Internal fault |
| IAM-2002 | Control module. Internal fault |
| IAM-2003 | Control module. Internal fault |
| IAM-2004 | Control module. Internal fault |
| IAM-2005 | Control module. Internal fault |
| IAM-3001 | Front left speaker. Signal too low |
| IAM-3002 | Front left speaker. Signal too high |
| IAM-3003 | Front left speaker. Faulty signal |
| IAM-3004 | Front left speaker. No signal |
| IAM-3005 | Front left speaker. Faulty signal |
| IAM-3011 | Front right speaker. Signal too low |
| IAM-3012 | Front right speaker. Signal too high |
| IAM-3013 | Front right speaker. Faulty signal |
| IAM-3014 | Front right speaker. No signal |
| IAM-3015 | Front right speaker. Faulty signal |
| IAM-3021 | Rear left speaker. Signal too low |
| IAM-3022 | Rear left speaker. Signal too high |
| IAM-3023 | Rear left speaker. Faulty signal |
| IAM-3024 | Rear left speaker. No signal |
| IAM-3025 | Rear left speaker. Faulty signal |
| IAM-3031 | Rear right speaker. Signal too low |
| IAM-3032 | Rear right speaker. Signal too high |
| IAM-3033 | Rear right speaker. Faulty signal |
| IAM-3034 | Rear right speaker. No signal |
| IAM-3035 | Rear right speaker. Faulty signal |
| IAM-4001 | Microphone input. Signal missing |
| IAM-4002 | Microphone input. Signal too low |
| IAM-4003 | Microphone input. Signal too high |
| IAM-5001 | USB port. Signal too low |
| IAM-5002 | USB port. Signal too high |
| IAM-9001 | Control module. Configuration fault |
| IAM-9002 | Control module. Overheated |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.