Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Quick Check Of TPMS
The system can be checked using the diagnostic tool by activating a read out at the same time as activating the sensors using a special tool. The special tool is positioned against the tire, where the sensor is located, at the same time as a button is pressed on the special tool. The special tool transmits a signal that activates the sensor so that it starts transmitting signals to the central electronic module (CEM). The activated sensor's ID number and tire pressure is then shown in the display in the diagnostic tool.
The special tool for TPMS on the S80 (-06)/S60/V70/XC70/XC90 does not work with the sensors on the S80 (07-).
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.