Customer settings can be made via the infotainment control module (ICM).

The parameters which can be changed are described in the table below.

Function	Selectable values	Stored in	Remarks
Locking indication via the turn signal lamps	On / off	Central electronic module (CEM)
Unlocking indication via the turn signal lamps	On / off	Central electronic module (CEM)
Automatic locking when driving	On / off	Central electronic module (CEM)
Local lighting	30, 60 or 90 seconds	Central electronic module (CEM)
Approach lights	30, 60 or 90 seconds	Central electronic module (CEM)
Unlocking	Total or 2 stage	Central electronic module (CEM)	This setting applies when unlocking using the remote key.
Passive unlocking	Total unlocking, all doors	Keyless vehicle module (KVM)	Only in vehicles with keyless entry systems installed.
Passive unlocking	One of the doors	Keyless vehicle module (KVM)	Only in vehicles with keyless entry systems installed.
Passive unlocking	Doors on same side	Keyless vehicle module (KVM)	Only in vehicles with keyless entry systems installed.
Passive unlocking	Both front doors	Keyless vehicle module (KVM)	Only in vehicles with keyless entry systems installed.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Description Of Programmable Parameters, Customer Adaptation