2008 Volvo V70FACTORY OEM SERVICE PROCEDURE

Driver Information Module (Dim) DTCS

DRIVER INFORMATION MODULE (DIM) - DTC INDEX

DTC Description
DIM-B115C71 Transfer fuel pump. Mechanical Failures. Actuator stuck
DIM-B1B6916 12 Volt Supply Circuit. General Electrical Failures. Circuit voltage below threshold
DIM-B1B6917 12 Volt Supply Circuit. General Electrical Failures. Circuit voltage above threshold
DIM-C1A4815 Warning lamp. General Electrical Failures. Circuit short to battery or open
DIM-C200262 Odometer tampered. Algorithm Based Failures. Signal compare failure
DIM-P046071 Fuel Level Sensor A Circuit. Mechanical Failures. Actuator stuck
DIM-P134671 Fuel Level Sensor B Circuit. Mechanical Failures. Actuator stuck
DIM-U001000 Medium Speed CAN Communication Bus. General Failure Information. No sub type information
DIM-U010000 Lost Communication With Engine control module. General Failure Information. No sub type information
DIM-U014000 Lost Communication With Central electronic module. General Failure Information. No sub type information
DIM-U015100 Lost Communication With Supplemental Restraint System Module. General Failure Information. No sub type information
DIM-U015900 Lost Communication With Parking assistance module. General Failure Information. No sub type information
DIM-U019900 Lost Communication With Driver door module. General Failure Information. No sub type information
DIM-U020000 Lost Communication With Passenger door module. General Failure Information. No sub type information
DIM-U023500 Lost Communication With Forward sensing module. General Failure Information. No sub type information
DIM-U025200 Lost Communication With Trailer Module (TRM). General Failure Information. No sub type information
DIM-U030000 Internal Control Module Software Incompatibility. General Failure Information. No sub type information
DIM-U042268 Invalid Data Received From Central electronic module. Algorithm Based Failures. Event information
DIM-U042281 Invalid Data Received From Central electronic module. Bus Signal/Message Failures. Invalid serial data received
DIM-U1A2500 Lost Communication With ICM. General Failure Information. No sub type information
DIM-U210000 Control Module Not Configured. General Failure Information. No sub type information
DIM-U210100 Control Module Configuration Incompatible. General Failure Information. No sub type information
DIM-U210207 Adjust down button. General Failure Information. Mechanical Failures
DIM-U210307 Adjust up button. General Failure Information. Mechanical Failures
DIM-U210407 Trip meter reset button. General Failure Information. Mechanical Failures
DIM-U300044 Control Module. System Internal Failures. Data memory failure
DIM-U300045 Control Module. System Internal Failures. Program memory failure
DIM-U300362 Battery Voltage. Algorithm Based Failures. Signal compare failure
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.