2008 Volvo V70FACTORY OEM SERVICE PROCEDURE

Diagnostic Functions: Programming

To increase the security of the immobilizer system, the following control modules are linked to each other with codes.

  • central electronic module (CEM)
  • engine control module (ECM).
  • Keyless vehicle module (KVM) (only vehicles with the keyless locking system)
  • Start control module (SCU)
  • Steering Column Lock Module (SCL) (does not apply to USA/CDN market for 2009-).

Codes must be programmed when replacing the control module in order for the vehicle to start. Furthermore, the serial number for the Brake control module (BCM) is checked by the Engine control module (ECM) before the Engine control module (ECM) permits the vehicle to start. This requires that the serial number in the Brake control module (BCM) be entered into the Engine control module (ECM) when replacing the Brake control module (BCM) or replacing the Engine control module (ECM). This occurs automatically when downloading software into the new control module.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.