2006 Volvo S80 FWDFACTORY OEM SERVICE PROCEDURE

Driver Door Module (DDM) & Passenger Door Module (PDM) DTCS

DRIVER DOOR MODULE (DDM) & PASSENGER DOOR MODULE (PDM) - DTC INDEX

DTC Description
DDM/PDM-0001 Power window lift motor M+ or M-. Signal too high
DDM/PDM-0005 Power window lift motor M+ or M-. Signal too low or signal missing
DDM/PDM-0010 Central locking motor M1. Signal too low
DDM/PDM-0013 Central locking motor M3. Signal too low
DDM/PDM-0016 Central locking motor M2. Signal too low
DDM/PDM-0020 Power window mechanism hall sensor 1. Faulty signal
DDM/PDM-0021 Power window mechanism hall sensor 2. Faulty signal
DDM/PDM-0022 Power window mechanism hall sensor 1 and 2. Faulty signal
DDM/PDM-0023 Mirror motor MX+. Signal too high
DDM/PDM-0024 Mirror motor MX+. Signal too low
DDM/PDM-0025 Door mirror motor. Disconnected
DDM/PDM-0026 Mirror motor MY+. Signal too high
DDM/PDM-0027 Mirror motor MY+. Signal too low
DDM/PDM-0028 Mirror motor MF+. Signal too high
DDM/PDM-0029 Mirror motor MF+. Signal too low
DDM/PDM-002A Mirror motor MC. Signal too high
DDM/PDM-002B Mirror motor MC. Signal too low
DDM/PDM-002C Door mirror heater. Signal too high
DDM/PDM-002D Door mirror heater. Signal too low
DDM/PDM-002E Door mirror heater. Signal too high
DDM/PDM-002F Window motor. Signal too high
DDM/PDM-0030 Door mirror potentiometer. Faulty signal
DDM/PDM-0031 Door mirror potentiometer. Signal too low
DDM/PDM-0032 Door mirror potentiometer. Faulty signal
DDM/PDM-0033 Door mirror potentiometer. Signal too low
DDM/PDM-E010 Control module. Internal fault
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.