2006 Volvo S60 Base, AWDFACTORY OEM SERVICE PROCEDURE

Engine Control Module (ECM) DTCS - B5244S

ENGINE CONTROL MODULE (ECM) DTC INDEX

OBD-II Code Volvo Code Description
P0105, P2228, P2230 ECM-1000 Engine control module (ECM). Faulty signal
P2227 ECM-100A Engine control module (ECM). Faulty signal
P0070, P0073, P0074 ECM-1100 Outside temperature sensor. Signal too high
P0072, P0074 ECM-1100 Outside temperature sensor. Signal too low
P0071 ECM-110A Outside temperature sensor. Faulty signal
P0110 ECM-1200 Intake Air Temperature (IAT) Sensor. Signal too high
P0112 ECM-1200 Intake Air Temperature (IAT) Sensor. Signal too low
P0111 ECM-120A Intake air temperature (IAT) sensor. Faulty signal
P0100, P0114 ECM-120D Intake air temperature (IAT) sensor. Faulty signal
P0103 ECM-1300 Mass air flow (MAF) sensor. Signal too low
P0101 ECM-130A Mass air flow (MAF) sensor. Faulty signal
P0105, P0107 ECM-1400 Manifold absolute pressure (MAP) sensor. Signal too high
P0105, P0107 ECM-1400 Manifold absolute pressure (MAP) sensor. Signal too low
P0106 ECM-140A Manifold absolute pressure (MAP) sensor. Faulty signal
- ECM-160A Electronic throttle unit. Faulty signal
P0115, P0118, P0119 ECM-2000 Engine coolant temperature (ECT) sensor. Signal too high
P0117, P0119 ECM-2000 Engine coolant temperature (ECT) sensor. Signal too low
P0116 ECM-200A Engine coolant temperature (ECT) sensor. Faulty signal
P0125 ECM-200F Engine coolant temperature (ECT) sensor. Faulty signal
P0128 ECM-201A Thermostat. Faulty signal
P0128 ECM-201A Thermostat. Faulty signal
P0133, P0134 ECM-210A Front heated oxygen sensor (HO2S). Faulty signal
P0133 ECM-210F Front heated oxygen sensor (HO2S). Faulty signal
P0133 ECM-210F Front heated oxygen sensor (HO2S). Faulty signal
P0031, P0032, P0135 ECM-2110 Front heated oxygen sensor (HO2S), heating. Signal too high
P0031, P0032 ECM-2110 Front heated oxygen sensor (HO2S), heating. Signal too high
P0031, P0032 ECM-2110 Front heated oxygen sensor (HO2S), heating. Signal too low
P0130, P0131, P0132 ECM-2120 Front heated oxygen sensor (HO2S), control element. Signal too high
P0131, P0132 ECM-2120 Front heated oxygen sensor (HO2S), control element. Signal too high
P0130, P0131, P0132 ECM-2120 Front heated oxygen sensor (HO2S), control element. Signal too low
P0131, P0132 ECM-2120 Front heated oxygen sensor (HO2S), control element. Signal too low
P0137 ECM-2200 Rear heated oxygen sensor (HO2S). Signal too high
P0138 ECM-2200 Rear heated oxygen sensor (HO2S). Signal too low
- ECM-220A Rear heated oxygen sensor (HO2S). Faulty signal
P1138 ECM-220B Rear heated oxygen sensor (HO2S). Signal too high
P1137 ECM-220B Rear heated oxygen sensor (HO2S). Signal too low
P0036, P0038 ECM-2210 Rear heated oxygen sensor (HO2S), preheating. Faulty signal
P0037 ECM-2210 Rear heated oxygen sensor (HO2S), preheating. Signal too high
P0038 ECM-2210 Rear heated oxygen sensor (HO2S), preheating. Signal too low
P0161, P0201 ECM-2300 Injector cylinder 1. Faulty signal
P0161, P0201 ECM-2300 Injector cylinder 1. Faulty signal
P0202 ECM-2310 Injector cylinder 2. Faulty signal
P0202 ECM-2310 Injector cylinder 2. Faulty signal
P0203, P2235 ECM-2320 Injector cylinder 3. Faulty signal
P0203, P2235 ECM-2320 Injector cylinder 3. Faulty signal
P0204 ECM-2330 Injector cylinder 4. Faulty signal
P0204 ECM-2330 Injector cylinder 4. Faulty signal
P0205 ECM-2340 Injector cylinder 5. Faulty signal
P0205 ECM-2340 Injector cylinder 5. Faulty signal
P0171, P0172 ECM-250A Long-term fuel trim. Lower limit
P0171, P0172 ECM-250A Long-term fuel trim. Lower limit
P0171, P0172 ECM-250A Long-term fuel trim. Upper limit
P0171, P0172 ECM-250A Long-term fuel trim. Upper limit
P0192, P0193, P0194 ECM-2600 Fuel pressure sensor. Signal too low
P0190, P0192, P0194 ECM-2600 Fuel pressure sensor. Signal too high
P0191 ECM-260A Fuel pressure sensor. Faulty signal
P0092 ECM-2610 Fuel pump control module. Signal too high
P0089 ECM-261A Fuel pressure system. Faulty signal
P0089 ECM-261A Fuel pressure system. Faulty signal
P0089 ECM-261A Fuel pressure system. Signal too high
P0089 ECM-261A Fuel pressure system. Signal too low
P0089 ECM-261A Fuel pressure system. Signal too low
P0180, P0183, P0184 ECM-2B00 Fuel temperature sensor. Signal too high
P0180, P0182, P0184 ECM-2B00 Fuel temperature sensor. Signal too low
P0324, P0340 ECM-3000 Camshaft position (CMP) sensor, intake. Faulty signal
P0341 ECM-300A Camshaft position (CMP) sensor, intake. Faulty signal
P0324, P0365 ECM-3010 Camshaft position (CMP) sensor, exhaust. Faulty signal
P0366 ECM-301A Camshaft position (CMP) sensor, exhaust. Faulty signal
P0335 ECM-3100 Engine speed (RPM) sensor. Faulty signal
P0336 ECM-310A Engine speed (RPM) sensor. Faulty signal
P0339 ECM-310A Engine speed (RPM) sensor. Intermittent fault
P0350 ECM-3200 Ignition coil. Faulty signal
- ECM-33X0 Ignition coil x. Faulty signal
P0327 ECM-3400 Knock sensor (KS). Signal too high
P0328 ECM-3400 Knock sensor (KS). Signal too low
P0326 ECM-340A Knock sensor (KS). Too little roar
P0326 ECM-340A Knock sensor (KS). Too much roar
- ECM-341A Knock sensor (KS), rear. Too little roar
P0300 ECM-3502 Misfire, emission effect. Misfire cyl 1
P0300 ECM-3502 Misfire, emission effect. Misfire cyl 1
P0301 ECM-3502 Misfire, emission effect. Misfire cyl 2
P0302 ECM-3502 Misfire, emission effect. Misfire cyl 3
P0303 ECM-3502 Misfire, emission effect. Misfire cyl 4
P0304 ECM-3502 Misfire, emission effect. Misfire cyl 5
P0305 ECM-3502 Misfire, emission effect. Misfire, at least one cylinder
P0305 ECM-3502 Misfire, emission effect. Misfire, at least one cylinder
P0300 ECM-3503 Misfire, catalytic converter damage. Misfire cyl 1
P0300 ECM-3503 Misfire, catalytic converter damage. Misfire cyl 1
P0301 ECM-3503 Misfire, catalytic converter damage. Misfire cyl 2
P0303 ECM-3503 Misfire, catalytic converter damage. Misfire cyl 4
P0304 ECM-3503 Misfire, catalytic converter damage. Misfire cyl 5
P0305 ECM-3503 Misfire, catalytic converter damage. Misfire, at least one cylinder
P0305 ECM-3503 Misfire, catalytic converter damage. Misfire, at least one cylinder
P0302 ECM-3503 Misfire, catalytic converter damage. Misfire cyl 3
P0458, P0459 ECM-4000 Canister purge (CP) valve. Signal too low
P0458, P0459 ECM-4000 Canister purge (CP) valve. Signal too high
P0441 ECM-400A Canister purge (CP) valve. Faulty signal
P0457 ECM-4038 Fuel tank filler cap. Faulty signal
P0460, P0461, P0462, P0464, P2067 ECM-4050 Fuel level sensor. Faulty signal
- ECM-405A Fuel level sensor. Faulty signal
P0420 ECM-4201 Three-way catalytic converter (TWC) efficiency. Power deterioration
P0420 ECM-4201 Three-way catalytic converter (TWC) efficiency. Power deterioration
P0455 ECM-4308 Fuel tank system, leakage. Major leak
P0442 ECM-4308 Fuel tank system, leakage. Minor leak
P2402 ECM-4310 Leak diagnostic unit, pump. Signal too high
P2401, P4201 ECM-4310 Leak diagnostic unit, pump. Signal too low
P043F, P2405, P2406, P2407 ECM-431A Leak diagnostic unit, pump. Faulty signal
P0445, P2420 ECM-4320 Leak diagnostic unit, valve. Signal too high
P0444, P2419 ECM-4320 Leak diagnostic unit, valve. Signal too low
P2404, P2421 ECM-432A Leak diagnostic unit, valve. Faulty signal
P0532, P0533 ECM-5000 Air conditioning (A/C) pressure sensor. Signal too low
P0532, P0533 ECM-5000 Air conditioning (A/C) pressure sensor. Signal too low
P0532, P0533 ECM-5000 Air conditioning (A/C) pressure sensor. Signal too high
P0532, P0533 ECM-5000 Air conditioning (A/C) pressure sensor. Signal too high
P0531 ECM-500A Air conditioning (A/C) pressure sensor. Faulty signal
P0531 ECM-500A Air conditioning (A/C) pressure sensor. Faulty signal
P0531 ECM-500A Air conditioning (A/C) pressure sensor. No signal
P0531 ECM-500A Air conditioning (A/C) pressure sensor. No signal
P0500 ECM-510D Vehicle speed signal. Faulty signal
P0500, P0501, P2162 ECM-510F Vehicle speed signal. Faulty signal
P0152, P0338, P1007, P1336 ECM-5200 Starter motor signal. Signal too high
P0152, P0338 ECM-5200 Starter motor signal. Signal too high
P0152, P0337, P1007, P1336 ECM-5200 Starter motor signal. Signal too low
P0152, P0337 ECM-5200 Starter motor signal. Signal too low
P0502, P0700, P1057, P1618 ECM-530D Diagnostic trouble code (DTC) in transmission control module (TCM). Faulty signal
P0502, P0700 ECM-530D Diagnostic trouble code (DTC) in transmission control module (TCM). Faulty signal
P0602 PC322 ECM-531D Diagnostic trouble code (DTC) in the central electronic module (CEM). Faulty signal
P1059, P2177 ECM-532D Emissions impact. Faulty signal
P2177 ECM-532D Emissions impact. Faulty signal
- ECM-5400 Oil quality sensor. Signal too high
- ECM-5400 Oil quality sensor. Signal too low
- ECM-540A Oil quality sensor. Faulty signal
P0645, P0646, P0647 ECM-6000 Air conditioning (A/C) relay. Signal too high
P0646, P0647 ECM-6000 Air conditioning (A/C) relay. Signal too high
P0645, P0646, P0647 ECM-6000 Air conditioning (A/C) relay. Signal too low
P0646, P0647 ECM-6000 Air conditioning (A/C) relay. Signal too low
P0480, P0483, P0484, P0485, P0691, P1480 ECM-6100 Engine cooling fan control module. Faulty signal
P0480, P0483, P0484, P0485, P0691, P1480 ECM-6100 Engine cooling fan control module. Faulty signal
P0480, P0692 ECM-6100 Engine cooling fan control module. Signal too high
P0692 ECM-6100 Engine cooling fan control module. Signal too high
P0480, P0691 ECM-6100 Engine cooling fan control module. Signal too low
P0480, P0691 ECM-6100 Engine cooling fan control module. Signal too low
P0507 ECM-620A Idling speed. High
P0506 ECM-620A Idling speed. Low
P0077 ECM-6400 Camshaft reset valve, intake Signal missing
P0075, P0077 ECM-6400 Camshaft reset valve, intake Signal too high
P0076, P0077 ECM-6400 Camshaft reset valve, intake Signal too low
P0026 ECM-640A Camshaft control, intake. Signal too high
P0026 ECM-640A Camshaft control, intake. Signal too low
P0011 ECM-640F Camshaft position, intake. Signal too high
P0011 ECM-640F Camshaft position, intake. Signal too low
P0078 ECM-6410 Camshaft reset valve, exhaust. Signal missing
P0079 ECM-6410 Camshaft reset valve, exhaust. Signal too high
P0080 ECM-6410 Camshaft reset valve, exhaust. Signal too low
P0027 ECM-641A Camshaft control, exhaust. Signal too high
P0027 ECM-641A Camshaft control, exhaust. Signal too low
P0014, P0015 ECM-641F Camshaft position, exhaust. Signal too high
P0014, P0015 ECM-641F Camshaft position, exhaust. Signal too low
P0607 PC422 ECM-710A CAN communication. Faulty signal
P0666, P0669, P1636 ECM-7140 Engine control module (ECM), internal fault. Signal too high
P0666, P0669 ECM-7140 Engine control module (ECM), internal fault. Signal too high
P0668, P0669, P1635 ECM-7140 Engine control module (ECM), internal fault. Signal too low
P0668, P0669 ECM-7140 Engine control module (ECM), internal fault. Signal too low
P0634, P1048, P1637, P1638 ECM-715D Engine control module (ECM), high temperature. Temperature too high
P0634, P1638 ECM-715D Engine control module (ECM), high temperature. Temperature too high
P0634, P1049, P1638 ECM-716D Engine control module (ECM), high temperature. Temperature too high
P0634 ECM-716D Engine control module (ECM), high temperature. Temperature too high
P1136, P1722 ECM-7170 ECU-box cooling fan. Signal too high
P1136, P1721 ECM-7170 ECU-box cooling fan. Signal too low
P1081, P1670 PC167 ECM-720A Immobilizer communication. Faulty communication
P1081 PC426 ECM-720A Immobilizer communication. Incorrect VIN code
P1081, P1670 PC426 ECM-720A Immobilizer communication. No communication
P0603 ECM-8000 +30-supply to control module. Open-circuit
P0603 ECM-8000 +30-supply to control module. Open-circuit
P0563 ECM-8010 Battery voltage. Charge too high
P0563 ECM-8010 Battery voltage. Charge too high
P0562 ECM-8010 Battery voltage. Charged too long
P0562 ECM-8010 Battery voltage. Charged too long
P0560, P0685 ECM-820A System relay. Faulty signal
P0685 ECM-820A System relay. Faulty signal
P0608, P0642, P0643 ECM-8400 Power supply 5 volt. Signal too high
P0642, P0643 ECM-8400 Power supply 5 volt. Signal too high
P0608, P0642, P0643 ECM-8400 Power supply 5 volt. Signal too low
P0642, P0643 ECM-8400 Power supply 5 volt. Signal too low
P0607 ECM-900C Engine control module (ECM). Internal fault
P0607 ECM-900E Engine control module (ECM) Internal fault
P0607 ECM-900E Engine control module (ECM) Internal fault
P0574 ECM-902C Engine control module (ECM). Internal fault
P0579, P2135 ECM-9200 Cruise control. Faulty signal
P0575 ECM-922C Cruise control. Communication fault
P0806, P0807, P0808 ECM-930C Clutch pedal sensor. Faulty signal
P0581, P0808 ECM-930C Clutch pedal sensor. Signal too high
P0807 ECM-930C Clutch pedal sensor. Signal too low
P0571 ECM-940C Brake control module (BCM). Faulty signal
P0571 ECM-940C Brake control module (BCM). Signal missing
P0703 ECM-941C Stop lamp switch. Faulty signal
P2120, P2122, P2123, P2127, P2138 ECM-950C Accelerator pedal (AP) position sensor. Analog signal too high
P2120, P2122, P2123, P2127, P2138 ECM-950C Accelerator pedal (AP) position sensor. Analog signal too low
P2120, P2122, P2123, P2127, P2138 ECM-950C Accelerator pedal (AP) position sensor. Comparison fault
P2120, P2122, P2123, P2127, P2138 ECM-950C Accelerator pedal (AP) position sensor. Faulty pulse width modulation (PWM) signal
P2120, P2122, P2123, P2127, P2138 ECM-950C Accelerator pedal (AP) position sensor. Pulse width modulation (PWM) signal too high
P2120, P2122, P2123, P2127, P2138 ECM-950C Accelerator pedal (AP) position sensor. Pulse width modulation (PWM) signal too low
P2111 ECM-9818 Brake vacuum. Reduced brake vacuum
P2172 ECM-990F Torque monitoring. Faulty signal
P2106 ECM-9918 Electronic throttle module (ETM). Faulty signal
- ECM-9A0A Vehicle behavior. Drivability problems
PC101 ECM-A00B , Transmission control module communication. Faulty signal
P0600 PC121 U0121 ECM-A02B Communication, control module for anti-lock brakes (ABS). Faulty signal
PC121 U0121 ECM-A02B Communication, control module for anti-lock brakes (ABS). Faulty signal
P0600 PC140 U0141 ECM-A03B Communication, Central electronic module. Faulty signal
PC140 U0141 ECM-A03B Communication, Central electronic module. Faulty signal
PC001 ECM-E000 Control module communication. Faulty communication
P1630 ECM-E003 Configuration fault. Faulty configuration
- ECM-XXXX Unknown diagnostic trouble code (DTC) for the current control module version
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.