2006 Volvo C70 AutomaticFACTORY OEM SERVICE PROCEDURE

Infotainment Control Module (ICM) DTCS

INFOTAINMENT CONTROL MODULE (ICM) - DTC INDEX

DTC Description
ICM-1A02 Control module. Faulty voltage
ICM-1A03 Control module. Faulty voltage
ICM-1A51 Communication with the audio module (AUD). Signal missing
ICM-1A52 Communication with the AM/FM tuner module (AFM). Signal missing
ICM-1A53 Communication with the multimedia module (MMM). Signal missing
ICM-1A54 Communication with the subwoofer module (SUB). Signal missing
ICM-1A55 Communication with the media player module (MPM). Signal missing
ICM-1A57 Communication with the phone module (PHM). Signal missing
ICM-1A58 Communication with the global positioning system module (GPS). Signal missing
ICM-1A59 Communication with the traffic message channel module (TMC). Signal missing
ICM-1A5A Communication with integrated audio module (IAM). Signal missing
ICM-1D01 Control module. Internal fault
ICM-1D03 Control module, not fully programmed. Internal fault
ICM-1D07 Control module. Internal fault
ICM-1D08 Control module. Internal fault
ICM-1D09 Control module. Internal fault
ICM-1F36 Heating, display. Signal missing
ICM-1F37 Display. Signal missing
ICM-1F38 Temperature sensor. Faulty signal
ICM-1F40 Receiver remote control. Short-circuit to ground
ICM-6C70 AM/FM tuner module (AFM) not approved. Faulty signal
ICM-6C71 Audio module (AUD) not approved. Faulty signal
ICM-6C72 Multimedia module (MMM) not approved. Faulty signal
ICM-6C73 Subwoofer module (SUB) not approved. Faulty signal
ICM-6C74 Media player module (MPM) not approved. Faulty signal
ICM-6C76 Phone module (PHM) not approved. Faulty signal
ICM-6C77 Global positioning system module (GPS) not approved. Faulty signal
ICM-6C78 Traffic message channel module (TMC) not approved. Faulty signal
ICM-6C79 Infotainment control module (ICM) not approved. Faulty signal
ICM-6C7A Integrated audio module (IAM) not valid. Faulty signal
ICM-9F01 Display. Signal missing
ICM-DC00 Control module communication. Internal fault
ICM-DC01 Control module communication. Faulty signal
ICM-DC02 Control module communication. Communication missing
ICM-E001 Control module communication. Faulty communication
ICM-E003 Configuration fault. Faulty configuration
ICM-E010 Power supply. Signal too low
ICM-XXXX Unknown diagnostic trouble code (DTC) for the current control module version
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.