Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Volvo XC90 T-6FACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | w/o Rear AC | 6.00 OZS. | 0.17 L | PAG 46 | S | ||
| Air Cond Compressor Oil | w/Rear A/C | 7.00 OZS. | 0.2 L | PAG 46 | S | ||
| Air Cond Refrigerant | Front | 2.20 LBS. | 0.99 KG | R-134a | S | ||
| Air Cond Refrigerant | Rear | 2.90 LBS. | 1.31 KG | R-134a | S | ||
| Automatic Transmission Fluid | 4 Spd Trans | 7.60 QTS. | 7.19 L | Automatic Transmission Fluid DEXRON IIIG | Different types of oil should never be mixed. | S | |
| Brake Fluid | 0.63 QTS. | 0.59 L | DOT 4+ Brake Fluid | S | |||
| Engine Coolant | 2.9L Eng | 11.00 QTS. | 10.4 L | 50/50 mixture of VOLVO Antifreeze/Coolant and water | S | ||
| Engine Oil | 2.9L Eng | 7.00 QTS. | 6.62 L | ILSAC, GF-2, ACEA A1, API - SJ, SJ/CG and SJ/Enery Conserving, SAE 5W-30 | When temperatures exceed 86Deg.F (30Deg.C) VOLVO recommends SAE 10W-30. Under normal use when temperatures DO NOT exceed 86Deg.F (30Deg.C), SAE 5W-30 will provide good fuel economy and engine protection. Synthetic oils meeting SAE 10W-30 and complying with quality requirements are recommended for driving in areas of sustained temperatures extremes (hot or cold), when towing a trailer over long distances, and for prolonged driving in mountainous areas. | S | |
| Fuel Tank | 21.00 GALS. | 79.49 L | S | ||||
| Power Steering Fluid | 0.90 QTS. | 0.85 L | VOLVO Synthetic Power Steering Fluid (Pentosin CHF 11 S) | Part No. 1161529 or equivalent. | S | ||
| Windshield Washer Fluid | 6.90 QTS. | 6.52 L | Reservoir should be filled with water and solvent (winter time: windshield washer antifreeze). | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.