Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Volvo XC90 Base, 4.4 85FACTORY OEM SERVICE PROCEDURE
Brake Control Module (BCM) DTCS
BRAKE CONTROL MODULE (BCM) - DTC INDEX
| DTC | Description |
|---|---|
| BCM-0010 | Left front wheel sensor. Signal missing (B5254T2) |
| BCM-0010 | Left front wheel sensor. Signal missing (B6294T) |
| BCM-0011 | Left front wheel sensor. Faulty signal (B5254T2) |
| BCM-0011 | Left front wheel sensor. Faulty signal (B6294T) |
| BCM-0012 | Left front wheel sensor. Faulty signal (B5254T2) |
| BCM-0012 | Left front wheel sensor. Faulty signal (B6294T) |
| BCM-0030 | Left rear wheel sensor. Signal missing (B5254T2) |
| BCM-0030 | Left rear wheel sensor. Signal missing (B6294T) |
| BCM-0050 | Control module. Faulty signal (B5254T2) |
| BCM-0050 | Control module. Faulty signal (B6294T) |
| BCM-0052 | Control module. Internal fault (B5254T2) |
| BCM-0052 | Control module. Internal fault (B6294T) |
| BCM-0057 | Power supply. Voltage too low (B5254T2) |
| BCM-0057 | Power supply. Voltage too low (B6294T) |
| BCM-0058 | Power supply. Voltage too high (B5254T2) |
| BCM-0058 | Power supply. Voltage too high (B6294T) |
| BCM-0061 | Brake discs. Temperature too high (B5254T2) |
| BCM-0061 | Brake discs. Temperature too high (B6294T) |
| BCM-0065 | Stop lamp switch. Faulty signal (B5254T2) |
| BCM-0065 | Stop lamp switch. Faulty signal (B6294T) |
| BCM-0068 | Sensor power supply. Faulty signal (B5254T2) |
| BCM-0068 | Sensor power supply. Faulty signal (B6294T) |
| BCM-0070 | Power supply for the pump motor. Faulty signal (B5254T2) |
| BCM-0070 | Power supply for the pump motor. Faulty signal (B6294T) |
| BCM-0071 | Pump motor. Signal missing (B5254T2) |
| BCM-0071 | Pump motor. Signal missing (B6294T) |
| BCM-0072 | Pump motor. Mechanical fault (B5254T2) |
| BCM-0072 | Pump motor. Mechanical fault (B6294T) |
| BCM-0074 | Hydraulic valves. Faulty signal (B5254T2) |
| BCM-0074 | Hydraulic valves. Faulty signal (B6294T) |
| BCM-0076 | Control module. Faulty configuration (B5254T2) |
| BCM-0076 | Control module. Faulty configuration (B6294T) |
| BCM-0080 | Lateral accelerometer. Incorrect offset value (B5254T2) |
| BCM-0080 | Lateral accelerometer. Incorrect offset value (B6294T) |
| BCM-0090 | Lateral accelerometer. Faulty signal (B5254T2) |
| BCM-0090 | Lateral accelerometer. Faulty signal (B6294T) |
| BCM-0094 | Communication between control units Communication problems with DEM (B5254T2) |
| BCM-0094 | Communication between control units Communication problems with DEM (B6294T) |
| BCM-0095 | Communication between control units Communication problems with DEM (B5254T2) |
| BCM-0095 | Communication between control units Communication problems with DEM (B6294T) |
| BCM-0097 | Communication between control modules. Communication problems with the central electronic module (CEM) (B5254T2) |
| BCM-0097 | Communication between control modules. Communication problems with the central electronic module (CEM) (B6294T) |
| BCM-0100 | Communication between control modules. Communication problems with the engine control module (ECM) (B5254T2) |
| BCM-0100 | Communication between control modules. Communication problems with the engine control module (ECM) (B6294T) |
| BCM-0101 | Communication between control modules. Communication problems with the engine control module (ECM) (B5254T2) |
| BCM-0101 | Communication between control modules. Communication problems with the engine control module (ECM) (B6294T) |
| BCM-0103 | Pedal position sensor. Faulty signal (B5254T2) |
| BCM-0103 | Pedal position sensor. Faulty signal (B6294T) |
| BCM-0106 | Steering wheel or wheel alignment. Incorrect steering wheel or wheel alignment (B5254T2) |
| BCM-0106 | Steering wheel or wheel alignment. Incorrect steering wheel or wheel alignment (B6294T) |
| BCM-0108 | Communication between control modules. Communication with the steering angle sensor. Control module not initiated (B5254T2) |
| BCM-0108 | Communication between control modules. Communication with the steering angle sensor. Control module not initiated (B6294T) |
| BCM-0109 | Communication between control modules. Communication with the steering angle sensor. Internal fault (B5254T2) |
| BCM-0109 | Communication between control modules. Communication with the steering angle sensor. Internal fault (B6294T) |
| BCM-0111 | Communication between control modules. Check of the steering angle sensor tolerances has not been run (B5254T2) |
| BCM-0111 | Communication between control modules. Check of the steering angle sensor tolerances has not been run (B6294T) |
| BCM-0112 | Active yaw control sensor. Sensor not calibrated (B5254T2) |
| BCM-0112 | Active yaw control sensor. Sensor not calibrated (B6294T) |
| BCM-0113 | Back-up (reversing) signal. Signal missing (B5254T2) |
| BCM-0113 | Back-up (reversing) signal. Signal missing (B6294T) |
| BCM-0114 | Communication with the active yaw control sensor. Signal missing (B5254T2) |
| BCM-0114 | Communication with the active yaw control sensor. Signal missing (B6294T) |
| BCM-0115 | Communication between control modules. Communication with the steering angle sensor. Signal missing (B5254T2) |
| BCM-0115 | Communication between control modules. Communication with the steering angle sensor. Signal missing (B6294T) |
| BCM-0116 | Communication with the active yaw control sensor. Communication problems (B5254T2) |
| BCM-0116 | Communication with the active yaw control sensor. Communication problems (B6294T) |
| BCM-0117 | Communication with the active yaw control sensor. An incorrect active yaw control sensor had been installed (B5254T2) |
| BCM-0117 | Communication with the active yaw control sensor. An incorrect active yaw control sensor had been installed (B6294T) |
| BCM-0118 | Power supply for the active yaw control sensor. Voltage too high (B5254T2) |
| BCM-0118 | Power supply for the active yaw control sensor. Voltage too high (B6294T) |
| BCM-0119 | Power supply for the active yaw control sensor. Voltage too low (B5254T2) |
| BCM-0119 | Power supply for the active yaw control sensor. Voltage too low (B6294T) |
| BCM-0121 | Yaw rate sensor. Signal outside its permitted range (B5254T2) |
| BCM-0121 | Yaw rate sensor. Signal outside its permitted range (B6294T) |
| BCM-0123 | Active yaw control sensor. Internal fault (B5254T2) |
| BCM-0123 | Active yaw control sensor. Internal fault (B6294T) |
| BCM-0130 | Brake pressure sensor 1. Signal too low (B5254T2) |
| BCM-0130 | Brake pressure sensor 1. Signal too low (B6294T) |
| BCM-0136 | Brake pressure sensor 1 and 2. Signal outside its permitted range (B5254T2) |
| BCM-0136 | Brake pressure sensor 1 and 2. Signal outside its permitted range (B6294T) |
| BCM-0138 | Power supply for the active yaw control sensor. Faulty voltage (B5254T2) |
| BCM-0138 | Power supply for the active yaw control sensor. Faulty voltage (B6294T) |
| BCM-0139 | Pressure build-up valve, power brake booster. Signal outside its permitted range (B5254T2) |
| BCM-0139 | Pressure build-up valve, power brake booster. Signal outside its permitted range (B6294T) |
| BCM-0140 | Pedal pressure sensor. Signal outside its permitted range (B5254T2) |
| BCM-0140 | Pedal pressure sensor. Signal outside its permitted range (B6294T) |
| BCM-0145 | Stability control. Too long stability control (B5254T2) |
| BCM-0145 | Stability control. Too long stability control (B6294T) |
| BCM-0146 | Factory test, dynamic stability and traction control (DSTC). Test cycle not approved (B5254T2) |
| BCM-0146 | Factory test, dynamic stability and traction control (DSTC). Test cycle not approved (B6294T) |
| BCM-0147 | Pedal position sensor. Signal outside its permitted range (B5254T2) |
| BCM-0147 | Pedal position sensor. Signal outside its permitted range (B6294T) |
| BCM-0148 | Communication between control modules. Faulty configuration ID (B5254T2) |
| BCM-0148 | Communication between control modules. Faulty configuration ID (B6294T) |
| BCM-0150 | Stop lamp switch. Signal outside its permitted range (B5254T2) |
| BCM-0150 | Stop lamp switch. Signal outside its permitted range (B6294T) |
| BCM-0151 | Control module. Internal memory fault (B5254T2) |
| BCM-0151 | Control module. Internal memory fault (B6294T) |
| BCM-A030 | Communication between control modules. Steering angle sensor. Initialization check not run (B5254T2) |
| BCM-A030 | Communication between control modules. Steering angle sensor. Initialization check not run (B6294T) |
| BCM-A031 | Communication between control modules. Steering angle sensor. Tolerance check not run (B5254T2) |
| BCM-A031 | Communication between control modules. Steering angle sensor. Tolerance check not run (B6294T) |
| BCM-A032 | Stability function. Too long stability control (B5254T2) |
| BCM-A032 | Stability function. Too long stability control (B6294T) |
| BCM-C002001 | ABS pump motor control. General malfunction information. General electrical malfunction (B8444S) |
| BCM-C00201C | ABS pump motor control. General electrical malfunction. Incorrect voltage (B8444S) |
| BCM-C002071 | ABS pump motor control. Mechanical malfunction. Jammed (B8444S) |
| BCM-C002201 | Brake servo solenoid. General malfunction information. General electrical malfunction (B8444S) |
| BCM-C003007 | Toothed wheel left front. General malfunction information. Mechanical malfunction (B8444S) |
| BCM-C003101 | Wheel speed sensor left front. General malfunction information. General electrical malfunction (B8444S) |
| BCM-C003107 | Wheel speed sensor left front. General malfunction information. Mechanical malfunction (B8444S) |
| BCM-C003701 | Wheel speed sensor left rear. General malfunction information. General electrical malfunction (B8444S) |
| BCM-C004064 | Brake pedal switch "A". Algorithm error. Signal outside permitted range (B8444S) |
| BCM-C004401 | Brake pressure sensor "A". General malfunction information. General electrical malfunction (B8444S) |
| BCM-C004664 | Brake pressure sensor "A"/"B". Algorithm error. Signal outside permitted range (B8444S) |
| BCM-C004801 | Pedal position sensor. General malfunction information. General electrical malfunction (B8444S) |
| BCM-C004864 | Pedal position sensor. Algorithm error. Signal outside permitted range (B8444S) |
| BCM-C006101 | Acceleration sensor lateral. General malfunction information. General electrical malfunction (B8444S) |
| BCM-C006128 | Acceleration sensor lateral. General signal error. Signal displacement error/zero adjustment error (B8444S) |
| BCM-C006164 | Acceleration sensor lateral. Algorithm error. Signal outside permitted range (B8444S) |
| BCM-C006A01 | Multi-axial acceleration sensor. General malfunction information. General electrical malfunction (B8444S) |
| BCM-C006A04 | Multi-axial acceleration sensor. General malfunction information. Internal error (B8444S) |
| BCM-C006A16 | Multi-axial acceleration sensor. General electrical malfunction. Voltage too low (B8444S) |
| BCM-C006A17 | Multi-axial acceleration sensor. General electrical malfunction. Voltage too high (B8444S) |
| BCM-C006B00 | Stability system active too long. General malfunction information. No information on malfunction type (B8444S) |
| BCM-C007200 | Brake temperature too high. General malfunction information. No information on malfunction type (B8444S) |
| BCM-C008204 | Brake system malfunction indicator. General malfunction information. Internal error (B8444S) |
| BCM-C008216 | Brake system malfunction indicator. General electrical malfunction. Voltage too low (B8444S) |
| BCM-C008217 | Brake system malfunction indicator. General electrical malfunction. Voltage too high (B8444S) |
| BCM-C008249 | Brake system malfunction indicator. Internal error. Electrical malfunction (B8444S) |
| BCM-C110668 | Communication between control modules. Algorithm error. Event-controlled information (B8444S) |
| BCM-C110687 | Communication between control modules. Bus/message error. Message missing (B8444S) |
| BCM-C110768 | Communication between control modules. Algorithm error. Event-controlled information (B8444S) |
| BCM-C110787 | Communication between control modules. Bus/message error. Message missing (B8444S) |
| BCM-C110801 | Voltage feed sensor. General malfunction information. General electrical malfunction (B8444S) |
| BCM-C111154 | AYC sensor. Programming error. Calibration missing (B8444S) |
| BCM-C111301 | Hydraulic valves. General malfunction information. General electrical malfunction (B8444S) |
| BCM-C111495 | Inclination sensor. Component malfunction. Incorrect assembly (B8444S) |
| BCM-C111542 | Control module. Internal malfunction. General memory error (B8444S) |
| BCM-C11164A | Factory test DSTC. Internal malfunction. Incorrect component (B8444S) |
| BCM-C111768 | Stability function. Algorithm error. Event-controlled information (B8444S) |
| BCM-C111802 | Brake servo disengage switch. General malfunction information. General signal error (B8444S) |
| BCM-E000 | Control module communication. Faulty communication (B5254T2) |
| BCM-E000 | Control module communication. Faulty communication (B6294T) |
| BCM-E003 | Configuration fault. Faulty configuration (B5254T2) |
| BCM-E003 | Configuration fault. Faulty configuration (B6294T) |
| BCM-U000100 | HS-CAN communication bus. General malfunction information. No information on malfunction type (B8444S) |
| BCM-U010000 | Failed communication with the Engine Control Module (ECM). General malfunction information. No information on malfunction type (B8444S) |
| BCM-U011400 | Failed communication with differential electronic module (DEM). General malfunction information. No information on malfunction type |
| BCM-U011400 | Failed communication with differential electronic module (DEM). General malfunction information. No information on malfunction type (B8444S) |
| BCM-U012587 | Failed communication with multi-axial acceleration sensor module. Bus/message error. Message missing (B8444S) |
| BCM-U012588 | Failed communication with multi-axial acceleration sensor module. Bus/message error. Open circuit (B8444S) |
| BCM-U012600 | Failed communication with steering angle sensor module (SAS). General malfunction information. No information on malfunction type (B8444S) |
| BCM-U030000 | Internal software incompatible with the control module. General malfunction information. No information on malfunction type (B8444S) |
| BCM-U030046 | Control module incompatible internal software. Internal error. Defective calibration/parameter memory (B8444S) |
| BCM-U030087 | Control module incompatible internal software. Bus/message error. Message missing (B8444S) |
| BCM-U040164 | Invalid data received from engine control module (ECM). Algorithm error. Signal outside permitted range (B8444S) |
| BCM-U040482 | Invalid data received from transmission control module (TCM). Bus/message error. Sequence counter not correct or not updated (B8444S) |
| BCM-U041464 | Invalid data received from connection differential electronic module (DEM). Algorithm error. Signal outside permitted range (B8444S) |
| BCM-U042829 | Invalid data received from steering angle sensor module (SAS). General signal error. Signal invalid (B8444S) |
| BCM-U042862 | Invalid data received from steering angle sensor module (SAS). Algorithm error. Comparison error (B8444S) |
| BCM-U042864 | Invalid data received from steering angle sensor module (SAS). Algorithm error. Signal outside permitted range (B8444S) |
| BCM-XXXX | Unknown diagnostic trouble code (DTC) for the current control module version (B5254T2) |
| BCM-XXXX | Unknown diagnostic trouble code (DTC) for the current control module version (B6294T) |
| BCM-XXXXXX | Unknown diagnostic trouble code for this control module version (B8444S) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
