Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Volvo S60 R, AutomaticFACTORY OEM SERVICE PROCEDURE
Climate Control Module (CCM) DTCS
CLIMATE CONTROL MODULE (CCM) DTC INDEX
| Volvo Code | Description |
|---|---|
| CCM-0001 | Configuration fault. Non-approved value |
| CCM-0002 | Evaporator temperature sensor. Signal too high/Signal missing |
| CCM-0003 | Evaporator temperature sensor. Signal too low |
| CCM-0004 | Passenger compartment temperature sensor. Signal too high/Signal missing |
| CCM-0005 | Passenger compartment temperature sensor. Signal too high/Signal missing |
| CCM-0006 | Blower fan motor passenger compartment temperature sensor. Signal too high/Signal missing |
| CCM-0011 | Control module. Internal fault |
| CCM-0020 | Function button. Activated too long |
| CCM-0030 | Left heater pad. Faulty signal |
| CCM-0031 | Sensor left-hand seat heater. Faulty signal |
| CCM-0032 | Left-hand seat heater. Internal fault |
| CCM-0033 | Left-hand seat heater. Internal fault |
| CCM-0034 | Right heater pad. Faulty signal |
| CCM-0035 | Sensor right-hand seat heater. Faulty signal |
| CCM-0036 | Right-hand seat heater. Internal fault |
| CCM-0037 | Right-hand seat heater. Internal fault |
| CCM-0040 | Air quality sensor. Internal fault |
| CCM-0050 | Blower fan knob. Faulty signal |
| CCM-0051 | Temperature control left. Faulty signal |
| CCM-0052 | Temperature control right. Faulty signal |
| CCM-0053 | Air distribution control. Faulty signal |
| CCM-0060 | Damper motor defroster. Internal fault |
| CCM-0061 | Recirculation damper motor. Internal fault |
| CCM-0062 | Left temperature damper motor. Internal fault |
| CCM-0063 | Right temperature damper motor. Internal fault |
| CCM-0064 | Air distribution damper motor. Internal fault |
| CCM-0070 | Configuration fault. Faulty identification |
| CCM-0071 | Damper motor. Faulty position |
| CCM-0072 | Damper motor. Initiation fault |
| CCM-0073 | Configuration fault. Calibration not done |
| CCM-0074 | Damper motor, defroster Internal fault |
| CCM-0074 | Damper motor, defroster Internal fault (L.H.D) |
| CCM-0075 | Damper motor Internal fault |
| CCM-0075 | Damper motor Internal fault (L.H.D) |
| CCM-0076 | Damper motor, temperature left Internal fault |
| CCM-0076 | Damper motor, temperature left Internal fault (L.H.D) |
| CCM-0077 | Damper motor, temperature right Internal fault |
| CCM-0077 | Damper motor, temperature right Internal fault (L.H.D) |
| CCM-0078 | Damper motor distribution Internal fault |
| CCM-0078 | Damper motor distribution Internal fault (L.H.D) |
| CCM-0090 | Lower switch. Faulty ID |
| CCM-0091 | Lower switch. ID missing |
| CCM-00A0 | Blower fan motor. Signal too low |
| CCM-00A1 | Blower fan motor. Signal too high |
| CCM-DD00 | LIN bus1. Incorrect data |
| CCM-DD01 | LIN bus1. Signal too high/Signal too low |
| CCM-DD02 | LIN bus1. Faulty check sum |
| CCM-DD10 | Air quality sensor (AQS). No communication |
| CCM-DD12 | Left-hand seat heater. No communication |
| CCM-DD14 | Recirculation damper motor. No communication |
| CCM-DD15 | Left temperature damper motor. No communication |
| CCM-DD16 | Damper motor air distribution. No communication |
| CCM-DD20 | LIN bus 2. Incorrect data |
| CCM-DD21 | LIN bus 2. Signal too high/Signal too low |
| CCM-DD22 | LIN bus 2. Incorrect check sum |
| CCM-DD30 | Right-hand seat heater. No communication |
| CCM-DD31 | Recirculation damper motor. No communication |
| CCM-DD32 | Right temperature damper motor. No communication |
| CCM-DD33 | Damper motor defroster. No communication |
| CCM-DD34 | Air quality sensor (AQS). No communication |
| CCM-E001 | Control module communication |
| CCM-E003 | Configuration fault |
| CCM-E010 | Power supply |
| CCM-XXXX | Unknown diagnostic trouble code (DTC) for the current control module version |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.