2003 Volvo XC90 T-6FACTORY OEM SERVICE PROCEDURE

Infotainment Control Module (ICM) DTCS

INFOTAINMENT CONTROL MODULE (ICM) - DTC INDEX

DTC Description
ICM-1A02 Control module. Faulty voltage
ICM-1A03 Control module. Faulty voltage
ICM-1A05 Control module. Faulty voltage
ICM-1A51 Communication with the audio module (AUD). Signal missing
ICM-1A52 Communication with the antenna module (ATM). Signal missing
ICM-1A53 Communication with the multimedia module (MMM). Signal missing
ICM-1A54 Communication with the Subwoofer module (SUB). Signal missing
ICM-1A55 Communication with the MD module (MP1). Signal missing
ICM-1A56 Communication with the CD module (MP2). Signal missing
ICM-1A57 Communication with the phone module (PHM). Signal missing
ICM-1D01 Control module. Internal fault
ICM-1D03 Control module, not fully programmed. Internal fault
ICM-1D07 Control module. Internal fault
ICM-1D08 Control module. Internal fault
ICM-1D09 Control module. Internal fault
ICM-1F20 Left keypad. Activated too long
ICM-1F21 Left-hand keypad circuit 1. Signal too high/too low
ICM-1F22 Left-hand keypad circuit 2. Signal too high/too low
ICM-1F23 Left-hand keypad circuit 3. Signal too high/too low
ICM-1F24 Left-hand keypad circuit 4. Signal too high/too low
ICM-1F25 Right-hand keypad circuit 5. Signal too high/too low
ICM-1F26 Right keypad. Activated too long
ICM-1F27 Right-hand keypad circuit 1. Signal too high/too low
ICM-1F28 Right-hand keypad circuit 2. Signal too high/too low
ICM-1F29 POWER button. Signal too high/low
ICM-1F30 POWER button. Activated too long
ICM-1F31 SOUND button. Activated too long
ICM-1F32 VOLUME knob. Signal missing
ICM-1F33 SELECTOR knob. Signal missing
ICM-1F34 VOLUME knob. Faulty signal
ICM-1F35 SELECTOR knob. Faulty signal
ICM-6C70 Antenna Module (ATM) not approved. Faulty signal
ICM-6C71 Audio module (AUD) not approved. Faulty signal
ICM-6C72 Multimedia module (MMM) not approved. Faulty signal
ICM-6C73 Subwoofer module (SUB) not approved. Faulty signal
ICM-6C74 MD module (MP1) not approved. Faulty signal
ICM-6C75 CD module (MP2) not approved. Faulty signal
ICM-6C76 Phone module (PHM) not approved. Faulty signal
ICM-6C79 Infotainment control module (ICM) not valid. Faulty signal
ICM-DC00 Control module communication. Internal fault
ICM-DC01 Control module communication. Faulty signal
ICM-DC02 Control module communication. Signal missing
ICM-E001 Control module communication. Internal fault
ICM-E003 Configuration fault. Software fault
ICM-E010 Power supply. Signal too low
ICM-XXXX Unknown diagnostic trouble code (DTC) for the current control module version
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.