Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Volvo XC70FACTORY OEM SERVICE PROCEDURE
System overview: Function
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.
The user can control the different central locking functions using:
- The key in the driver's door lock cylinder
- Remote control
- The switches in the driver's door module and the passenger door module
- The switch in the trunk lid handle (S60/S80 only)
- The switches in the center console
- Emergency lock cylinder in the trunk lid / tailgate (only S60/S80 and V70/V70XC with auxiliary rear facing seat)
- The switch on the control module for the light switch module for opening the fuel tank filler cover. Only applies to cars with a fuel tank filler cover remote switch.
The number of switches, lock cylinders, differs depending on the version of lock system.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.