2003 Volvo C70 2.3 53, StandardFACTORY OEM SERVICE PROCEDURE

Checking control module, continued

Fig 1: Identifying Ignition Off Position
GLL101045Courtesy of VOLVO CARS OF NORTH AMERICA.
  • Ignition off.

    Read off control button status.

    Adjust the seat backrest backwards and forwards with the control button.

    Fig 2: Identifying Scan Tool
    GLL100161Courtesy of VOLVO CARS OF NORTH AMERICA.

Status should change from NOT ACTIVE to ACTIVE when activation occurs. 



Fig 1: Identifying Ignition Off Position
GLL101045Courtesy of VOLVO CARS OF NORTH AMERICA.
  • Ignition off.

    Read off control button status.

    Adjust the rear seat edge height adjustment up and down with the control button.

    Fig 2: Identifying Scan Tool
    GLL100161Courtesy of VOLVO CARS OF NORTH AMERICA.

Status should change from NOT ACTIVE to ACTIVE when activation occurs. 



Fig 1: Identifying Ignition Off Position
GLL101045Courtesy of VOLVO CARS OF NORTH AMERICA.
  • Ignition off.

    Read off control button status.

    Adjust the front seat edge height adjustment up and down with the control button.

    Fig 2: Identifying Scan Tool
    GLL100161Courtesy of VOLVO CARS OF NORTH AMERICA.

Status should change from NOT ACTIVE to ACTIVE when activation occurs. 



Fig 1: Identifying Ignition Off Position
GLL101045Courtesy of VOLVO CARS OF NORTH AMERICA.
  • Ignition off.

    Read off memory buttons status.

    Activate the four memory buttons, one at a time.

    Fig 2: Identifying Scan Tool
    GLL100161Courtesy of VOLVO CARS OF NORTH AMERICA.

Status should change from NOT ACTIVE to ACTIVE when activation occurs. 

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.