Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Convertible system activating components and functions, Volvo Scan Tool (ST)
Activate Volvo Scan Tool (ST) components and functions by pressing the YES/NO or ENTER button to initiate the required function. (Use the left and right arrows on the Volvo Scan Tool (ST) to access the MOTOR SUB-MENU).
Take great care when operating the convertible top manually (with the Volvo Scan Tool (ST)). Carelessness will result in serious damage.
| No | Component / function | Function |
|---|---|---|
| 1 | MOTOR SUB-MENU | |
| 1.1 | CONVERTIBLE TOP | Activate the convertible top motors for opening and closing. |
| 1.2 | COVERPLATE LOCK | Activates the cover plate lock motor. |
| 1.3 | REAR LATCHES | Activates both the deployment and retraction of the rear latch arms. |
| 1.4 | FRONT LOCK | Activates the front latch arm motor. |
| 1.5 | TENSION BOW | Activates the motor for the tension bow. |
| 2 | FASCIA LED | Activates the LED which indicates convertible top operation. |
| 3 | AIRCONDITION | Activates the air conditioning (A/C) system (applies to ECC) |
| 4 | WINDOWS UP | The side windows are raised. |
| 5 | WINDOWS DOWN | The side windows are lowered. |
| 6 | RE.WINDOW HEATER | Activates the rear windshield heater. |
| 7 | ||
| 8 | TRUNK INHIBIT | Indicates that the trunk lid is closed even though it is open. |
| 9 | RE.WIN.HEAT.INP | Rear windshield input is powered. |
| 10 | CONV.TOP UP INP. | Input for the activation of convertible top closure (control switch). |
| 11 | CONV.TOP DN INP. | Input for the activation of convertible top opening (control switch). |
| 12 | TRUNK INPUT | Input for the trunk lid. |
| 13 | PARKBRAKE INP. | Input for the parking brake. |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.