Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Volvo V70 XCFACTORY OEM SERVICE PROCEDURE
General Data
| Β | B5244SΒ | B5244S2Β |
| Output (kW at RPM) | 125/5700 | 103/5700 |
| Maximum torque (Nm at RPM) | 230/4500 | 220/3780 |
| Maximum engine speed (RPM) | 6500 | 6500 |
| Idling speed (RPM) | 850 | 850 |
| No. of cylinders | 5 | 5 |
| Bore (mm) | 83.0 | 83.0 |
| Stroke (mm) | 90.0 | 90.0 |
| Cylinder displacement (dm 3 =liters) | 2435 | 2.435 |
| Firing order | 1-2-4-5-3 | 1-2-4-5-3 |
| Compression ratio | 10.3:1 | 10.3:1 |
| Weight, including oil (kg) | approximately 177 | approximately 177 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
