2002 Volvo S80 BaseFACTORY OEM SERVICE PROCEDURE

Activating Components And Functions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.

This function can be used to activate components/functions which affect the accessory electronic module (AEM) outputs.

The following components can be activated:

  • Buzzer signal for the reverse warning system, simulates reduced distance from an object from 2 meters to 0 meters
    NOTE:

    Does not apply to XC90 2003-, S80 2004-, V70/XC70 2005- and S60 2005-.

  • Start signal to the remote start unit
  • Speed signal, simulates a change in speed from 0 km/h to 255 km/h in stages of 5 km/h
  • Rheostat signal, simulates a change in light from 0% to 100% and then back to 0% in stages of 5%
  • Telemute signal which simulates the phone muting the radio.
  • Telemute signal which simulates the reverse warning system muting the radio.
    NOTE:

    Does not apply to XC90 2003-, S80 2004-, V70/XC70 2005- and S60 2005-.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.