Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2001 Volvo V70 T-5, StandardFACTORY OEM SERVICE PROCEDURE
Engine Control Module (ECM) DTCS - B5234T3
ENGINE CONTROL MODULE (ECM) DTC INDEX
| OBD-II Code | Volvo Code | Description |
|---|---|---|
| P0107, P0108, P1001, P1002, P1116, P1117, P2228, P2229, P2230 | ECM-1000 | Control module. Signal too high/Signal too low. Intermittent fault |
| P0107, P0108, P1001, P1002, P1116, P1117, P2228, P2229, P2230 | ECM-1000 | Control module. Signal too high/Signal too low. Permanent fault |
| P0073, P1112 | ECM-1100 | Outside temperature sensor. Signal too high. Intermittent fault |
| P0073, P1112 | ECM-1100 | Outside temperature sensor. Signal too high. Permanent fault |
| P0072, P1113 | ECM-1100 | Outside temperature sensor. Signal too low Permanent fault |
| P0072, P1113 | ECM-1100 | Outside temperature sensor. Signal too low. Intermittent fault |
| P0112, P0113 | ECM-1200 | Intake Air Temperature (IAT) Sensor. Signal too high. Intermittent fault |
| P0112, P0113 | ECM-1200 | Intake Air Temperature (IAT) Sensor. Signal too high. Permanent fault |
| P0112, P0113 | ECM-1200 | Intake Air Temperature (IAT) Sensor. Signal too low. Intermittent fault |
| P0112, P0113 | ECM-1200 | Intake Air Temperature (IAT) Sensor. Signal too low. Permanent fault |
| P0102 | ECM-1300 | Mass air flow (MAF) sensor. Flow too high. Intermittent fault |
| P0102 | ECM-1300 | Mass air flow (MAF) sensor. Flow too high. Permanent fault |
| P0103 | ECM-1300 | Mass air flow (MAF) sensor. Flow too low. Intermittent fault |
| P0103 | ECM-1300 | Mass air flow (MAF) sensor. Flow too low. Permanent fault |
| P0101 | ECM-130A | Air flow. Faulty flow |
| P0238 | ECM-1600 | Boost pressure sensor. Signal too high. Permanent fault |
| P0237 | ECM-1600 | Boost pressure sensor. Signal too low. Intermittent fault |
| P0237 | ECM-1600 | Boost pressure sensor. Signal too low. Permanent fault |
| P0238 | ECM-1600 | Boost pressure sensor. Signal too high. Intermittent fault |
| P0236 | ECM-170F | Atmospheric pressure sensor/boost pressure sensor range check. Faulty signal. Intermittent fault |
| P0236 | ECM-170F | Atmospheric pressure sensor/boost pressure sensor range check. Faulty signal. Permanent fault |
| P0116, P0117, P0118 | ECM-2000 | Engine coolant temperature (ECT) sensor. Faulty signal. Intermittent fault |
| P0116, P0117, P0118 | ECM-2000 | Engine coolant temperature (ECT) sensor. Faulty signal. Permanent fault |
| P0117, P0118 | ECM-2000 | Engine coolant temperature (ECT) sensor. Signal too high. Intermittent fault |
| P0117, P0118 | ECM-2000 | Engine coolant temperature (ECT) sensor. Signal too high. Permanent fault |
| P0117, P0118 | ECM-2000 | Engine coolant temperature (ECT) sensor. Signal too low. Intermittent fault |
| P0117, P0118 | ECM-2000 | Engine coolant temperature (ECT) sensor. Signal too low. Permanent fault |
| P0128 | ECM-201A | Thermostat. Faulty signal |
| P0262 | ECM-2310 | Injector 1. Signal too high. Intermittent fault |
| P0201 | ECM-2310 | Injector 1. Signal missing. Intermittent fault |
| P0201 | ECM-2310 | Injector 1. Signal missing. Permanent fault |
| P0262 | ECM-2310 | Injector 1. Signal too high. Permanent fault |
| P0261 | ECM-2310 | Injector 1. Signal too low. Intermittent fault |
| P0261 | ECM-2310 | Injector 1. Signal too low. Permanent fault |
| P0202 | ECM-2320 | Injector 2. Signal missing. Intermittent fault |
| P0202 | ECM-2320 | Injector 2. Signal missing. Permanent fault |
| P0265 | ECM-2320 | Injector 2. Signal too high. Intermittent fault |
| P0265 | ECM-2320 | Injector 2. Signal too high. Permanent fault |
| P0264 | ECM-2320 | Injector 2. Signal too low. Intermittent fault |
| P0264 | ECM-2320 | Injector 2. Signal too low. Permanent fault |
| P0203 | ECM-2330 | Injector 3. Signal missing. Intermittent fault |
| P0203 | ECM-2330 | Injector 3. Signal missing. Permanent fault |
| P0268 | ECM-2330 | Injector 3. Signal too high. Intermittent fault |
| P0268 | ECM-2330 | Injector 3. Signal too high. Permanent fault |
| P0267 | ECM-2330 | Injector 3. Signal too low. Intermittent fault |
| P0267 | ECM-2330 | Injector 3. Signal too low. Permanent fault |
| P0204 | ECM-2340 | Injector 4. Signal missing. Intermittent fault |
| P0204 | ECM-2340 | Injector 4. Signal missing. Permanent fault |
| P0271 | ECM-2340 | Injector 4. Signal too high. Intermittent fault |
| P0271 | ECM-2340 | Injector 4. Signal too high. Permanent fault |
| P0270 | ECM-2340 | Injector 4. Signal too low. Intermittent fault |
| P0270 | ECM-2340 | Injector 4. Signal too low. Permanent fault |
| P0205 | ECM-2350 | Injector 5. Signal missing. Intermittent fault |
| P0205 | ECM-2350 | Injector 5. Signal missing. Permanent fault |
| P0274 | ECM-2350 | Injector 5. Signal too high. Intermittent fault |
| P0274 | ECM-2350 | Injector 5. Signal too high. Permanent fault |
| P0273 | ECM-2350 | Injector 5. Signal too low. Intermittent fault |
| P0273 | ECM-2350 | Injector 5. Signal too low. Permanent fault |
| P0230, P0232 | ECM-2400 | Fuel pump (FP) relay. Signal too high. Intermittent fault |
| P0230, P0232 | ECM-2400 | Fuel pump (FP) relay. Signal too high. Permanent fault |
| P0231 | ECM-2400 | Fuel pump (FP) relay. Signal too low. Intermittent fault |
| P0231 | ECM-2400 | Fuel pump (FP) relay. Signal too low. Permanent fault |
| P1175, P2178, P2192 | ECM-260A | Long-term fuel trim. Lower limit |
| P1174, P2177, P2191 | ECM-260A | Long-term fuel trim. Upper limit |
| P0172, P1172, P2178 | ECM-261A | Long-term fuel trim. Lower limit |
| P0171, P1171, P2177 | ECM-261A | Long-term fuel trim. Upper limit |
| P0172, P2097, P2188 | ECM-262A | Long-term fuel trim. Lower limit |
| P0171, P2096, P2187 | ECM-262A | Long-term fuel trim. Upper limit |
| P1179 | ECM-268A | Long-term fuel trim. Faulty signal |
| P1178 | ECM-268A | Long-term fuel trim. Lower limit |
| P1177 | ECM-268A | Long-term fuel trim. Upper limit |
| P0130, P0133, P0134, P1133 | ECM-280A | Front heated oxygen sensor (HO2S), bank 1. Faulty signal. Intermittent fault |
| P0130, P0133, P0134, P1133 | ECM-280A | Front heated oxygen sensor (HO2S), bank 1. Faulty signal. Permanent fault |
| P0130, P1133 | ECM-280A | Front heated oxygen sensor (HO2S), bank 1. Signal missing. Intermittent fault |
| P0130, P1133 | ECM-280A | Front heated oxygen sensor (HO2S), bank 1. Signal missing. Permanent fault |
| P0132, P1132 | ECM-280A | Front heated oxygen sensor (HO2S), bank 1. Signal too high. Intermittent fault |
| P0132, P1132 | ECM-280A | Front heated oxygen sensor (HO2S), bank 1. Signal too high. Permanent fault |
| P0133 | ECM-280A | Front heated oxygen sensor (HO2S), bank 1. Signal too low. Intermittent fault |
| P0133 | ECM-280A | Front heated oxygen sensor (HO2S), bank 1. Signal too low. Permanent fault |
| P0030, P0031, P0135 | ECM-2810 | Front heated oxygen sensor (HO2S), bank 1 heating. Faulty signal. Intermittent fault |
| P0030, P0031, P0135 | ECM-2810 | Front heated oxygen sensor (HO2S), bank 1 heating. Faulty signal. Permanent fault |
| P0030 | ECM-2810 | Front heated oxygen sensor (HO2S), bank 1 heating. Signal missing. Intermittent fault |
| P0030 | ECM-2810 | Front heated oxygen sensor (HO2S), bank 1 heating. Signal missing. Permanent fault |
| P0032 | ECM-2810 | Front heated oxygen sensor (HO2S), bank 1 heating. Signal too high. Intermittent fault |
| P0032 | ECM-2810 | Front heated oxygen sensor (HO2S), bank 1 heating. Signal too high. Permanent fault |
| P0031 | ECM-2810 | Front heated oxygen sensor (HO2S), bank 1 heating. Signal too low. Intermittent fault |
| P0031 | ECM-2810 | Front heated oxygen sensor (HO2S), bank 1 heating. Signal too low. Permanent fault |
| P0136, P0137, P2232 | ECM-2A0A | Rear heated oxygen sensor (HO2S). Faulty signal. Intermittent fault |
| P0136, P0137, P2232 | ECM-2A0A | Rear heated oxygen sensor (HO2S). Faulty signal. Permanent fault |
| P0136, P0137 | ECM-2A0A | Rear heated oxygen sensor (HO2S). Signal missing. Intermittent fault |
| P0136, P0137 | ECM-2A0A | Rear heated oxygen sensor (HO2S). Signal missing. Permanent fault |
| P0137, P0138 | ECM-2A0A | Rear heated oxygen sensor (HO2S). Signal too high. Intermittent fault |
| P0137, P0138 | ECM-2A0A | Rear heated oxygen sensor (HO2S). Signal too high. Permanent fault |
| P0140 | ECM-2A1A | Rear heated oxygen sensor (HO2S) aging Signal too high. Intermittent fault |
| P0140 | ECM-2A1A | Rear heated oxygen sensor (HO2S) aging Signal too high. Permanent fault |
| P0036, P0037, P0141 | ECM-2A2A | Rear heated oxygen sensor (HO2S) preheating. Faulty signal. Intermittent fault |
| P0036, P0037, P0141 | ECM-2A2A | Rear heated oxygen sensor (HO2S) preheating. Faulty signal. Permanent fault |
| P0036 | ECM-2A2A | Rear heated oxygen sensor (HO2S) preheating. Signal missing. Permanent fault |
| P0038 | ECM-2A2A | Rear heated oxygen sensor (HO2S) preheating. Signal too high. Intermittent fault |
| P0038 | ECM-2A2A | Rear heated oxygen sensor (HO2S) preheating. Signal too high. Permanent fault |
| P0037 | ECM-2A2A | Rear heated oxygen sensor (HO2S) preheating. Signal too low. Intermittent fault |
| P0037 | ECM-2A2A | Rear heated oxygen sensor (HO2S) preheating. Signal too low. Permanent fault |
| P0036 | ECM-2A2A | Rear heated oxygen sensor (HO2S) preheating. Signal missing. Intermittent fault |
| P0340, P0342, P0344 | ECM-3000 | Camshaft position (CMP) sensor. Faulty signal. Intermittent fault |
| P0340, P0342, P0344 | ECM-3000 | Camshaft position (CMP) sensor. Faulty signal. Permanent fault |
| P0343 | ECM-3000 | Camshaft position (CMP) sensor. Signal too high. Intermittent fault |
| P0343 | ECM-3000 | Camshaft position (CMP) sensor. Signal too high. Permanent fault |
| P0342 | ECM-3000 | Camshaft position (CMP) sensor. Signal too low. Intermittent fault |
| P0342 | ECM-3000 | Camshaft position (CMP) sensor. Signal too low. Permanent fault |
| P0335 | ECM-3100 | Engine speed (RPM) sensor. Signal missing. Intermittent fault |
| P0335 | ECM-3100 | Engine speed (RPM) sensor. Signal missing. Permanent fault |
| P0351, P0352 | ECM-3300 | Ignition coil cylinder 1, signal. Signal missing. Intermittent fault |
| P0351 | ECM-3300 | Ignition coil cylinder 1, signal. Signal missing. Permanent fault |
| P1351, P2301 | ECM-3300 | Ignition coil cylinder 1, signal. Signal too high. Intermittent fault |
| P1351, P2301 | ECM-3300 | Ignition coil cylinder 1, signal. Signal too high. Permanent fault |
| P1350, P2300 | ECM-3300 | Ignition coil cylinder 1, signal. Signal too low. Intermittent fault |
| P1350, P2300 | ECM-3300 | Ignition coil cylinder 1, signal. Signal too low. Permanent fault |
| P0352 | ECM-3310 | Ignition coil cylinder 2, signal. Signal missing. Intermittent fault |
| P0351, P0352 | ECM-3310 | Ignition coil cylinder 2, signal. Signal missing. Permanent fault |
| P1353, P2304 | ECM-3310 | Ignition coil cylinder 2, signal. Signal too high. Intermittent fault |
| P1353, P2304 | ECM-3310 | Ignition coil cylinder 2, signal. Signal too high. Permanent fault |
| P1352, P2303 | ECM-3310 | Ignition coil cylinder 2, signal. Signal too low. Intermittent fault |
| P1352, P2303 | ECM-3310 | Ignition coil cylinder 2, signal. Signal too low. Permanent fault |
| P0353 | ECM-3320 | Ignition coil cylinder 3, signal. Signal missing. Intermittent fault |
| P0353 | ECM-3320 | Ignition coil cylinder 3, signal. Signal missing. Permanent fault |
| P1355, P2307 | ECM-3320 | Ignition coil cylinder 3, signal. Signal too high. Intermittent fault |
| P1355, P2307 | ECM-3320 | Ignition coil cylinder 3, signal. Signal too high. Permanent fault |
| P1354, P2306 | ECM-3320 | Ignition coil cylinder 3, signal. Signal too low. Intermittent fault |
| P1354, P2306 | ECM-3320 | Ignition coil cylinder 3, signal. Signal too low. Permanent fault |
| P0354 | ECM-3330 | Ignition coil cylinder 4, signal. Signal missing. Intermittent fault |
| P0354 | ECM-3330 | Ignition coil cylinder 4, signal. Signal missing. Permanent fault |
| P1357, P2310 | ECM-3330 | Ignition coil cylinder 4, signal. Signal too high. Intermittent fault |
| P1357, P2310 | ECM-3330 | Ignition coil cylinder 4, signal. Signal too high. Permanent fault |
| P1356, P2309 | ECM-3330 | Ignition coil cylinder 4, signal. Signal too low. Intermittent fault |
| P1356, P2309 | ECM-3330 | Ignition coil cylinder 4, signal. Signal too low. Permanent fault |
| P0355 | ECM-3340 | Ignition coil cylinder 5, signal. Signal missing. Intermittent fault |
| P0355 | ECM-3340 | Ignition coil cylinder 5, signal. Signal missing. Permanent fault |
| P1359, P2313 | ECM-3340 | Ignition coil cylinder 5, signal. Signal too high. Intermittent fault |
| P1359, P2313 | ECM-3340 | Ignition coil cylinder 5, signal. Signal too high. Permanent fault |
| P1358, P2312 | ECM-3340 | Ignition coil cylinder 5, signal. Signal too low. Intermittent fault |
| P1358, P2312 | ECM-3340 | Ignition coil cylinder 5, signal. Signal too low. Permanent fault |
| P0238, P0324, P0327, P0328, P1329 | ECM-3400 | Knock sensor (KS), test pulse. Signal too high/Signal too low. Permanent fault |
| P0238, P0324, P0327, P0328 | ECM-3400 | Knock sensor (KS), test pulse. Signal too high/Signal too low. Intermittent fault |
| P0328, P0333 | ECM-3410 | Knock sensor (KS) front. Signal too high. Intermittent fault |
| P0328, P0333 | ECM-3410 | Knock sensor (KS) front. Signal too high. Permanent fault |
| P0327, P0332 | ECM-3410 | Knock sensor (KS) front. Signal too low. Intermittent fault |
| P0327, P0332 | ECM-3410 | Knock sensor (KS) front. Signal too low. Permanent fault |
| P0333 | ECM-3420 | Knock sensor (KS) rear. Signal too high. Intermittent fault |
| P0332 | ECM-3420 | Knock sensor (KS) rear. Signal too low. Intermittent fault |
| P0332 | ECM-3420 | Knock sensor (KS) rear. Signal too low. Permanent fault |
| P0333 | ECM-3420 | Knock sensor (KS) rear. Signal too high. Permanent fault |
| P0324, P1326 | ECM-34E0 | Knock sensor (KS), offset. Signal too high/Signal too low. Intermittent fault |
| P0324, P1326 | ECM-34E0 | Knock sensor (KS), offset. Signal too high/Signal too low. Permanent fault |
| P0324, P1325 | ECM-34F0 | Knock sensor (KS), test pulse. Signal too high/Signal too low. Intermittent fault |
| P0324, P1325 | ECM-34F0 | Knock sensor (KS), test pulse. Signal too high/Signal too low. Permanent fault |
| P0300 | ECM-3503 | Misfire, at least one cylinder |
| P0301 | ECM-3513 | Misfire. Faulty signal |
| P0302 | ECM-3523 | Misfire. Faulty signal |
| P0303 | ECM-3533 | Misfire. Faulty signal |
| P0304 | ECM-3543 | Misfire. Faulty signal |
| P0305 | ECM-3553 | Misfire. Faulty signal |
| P0443 | ECM-4000 | Canister purge (CP) valve. Signal missing. Intermittent fault |
| P0443 | ECM-4000 | Canister purge (CP) valve. Signal missing. Permanent fault |
| P0443, P0444, P0459 | ECM-4000 | Canister purge (CP) valve. Signal too high. Intermittent fault |
| P0443, P0444, P0459 | ECM-4000 | Canister purge (CP) valve. Signal too high. Permanent fault |
| P0443, P0445, P0458 | ECM-4000 | Canister purge (CP) valve. Signal too low. Intermittent fault |
| P0443, P0445, P0458 | ECM-4000 | Canister purge (CP) valve. Signal too low. Permanent fault |
| P0440 | ECM-4008 | Canister purge (CP) valve. Leakage |
| P0447 | ECM-4010 | EVAP canister shut-off valve. Signal missing. Intermittent fault |
| P0447 | ECM-4010 | EVAP canister shut-off valve. Signal missing. Permanent fault |
| P0448 | ECM-4010 | EVAP canister shut-off valve. Signal too high. Intermittent fault |
| P0448 | ECM-4010 | EVAP canister shut-off valve. Signal too high. Permanent fault |
| P0448 | ECM-4010 | EVAP canister shut-off valve. Signal too low. Intermittent fault |
| P0448 | ECM-4010 | EVAP canister shut-off valve. Signal too low. Permanent fault |
| P0446 | ECM-4019 | EVAP canister shut-off valve. Flow fault |
| P0451, P0452, P0453 | ECM-4020 | Fuel tank pressure sensor. Faulty signal. Intermittent fault |
| P0451, P0452, P0453 | ECM-4020 | Fuel tank pressure sensor. Faulty signal. Permanent fault |
| P0452, P0453 | ECM-4020 | Fuel tank pressure sensor. Signal too high. Intermittent fault |
| P0452, P0453 | ECM-4020 | Fuel tank pressure sensor. Signal too high. Permanent fault |
| P0452, P0453 | ECM-4020 | Fuel tank pressure sensor. Signal too low. Intermittent fault |
| P0452, P0453 | ECM-4020 | Fuel tank pressure sensor. Signal too low. Permanent fault |
| P0460, P0461, P0462, P0463, P0464, P2067 | ECM-4050 | Fuel level sensor. Faulty signal |
| P0464 | ECM-4050 | Fuel level sensor. Signal missing |
| P0463 | ECM-4050 | Fuel level sensor. Signal too high |
| P0462 | ECM-4050 | Fuel level sensor. Signal too low |
| - | ECM-4308 | Leak diagnostic. Large leak |
| P0456 | ECM-430C | Leak diagnostic. Smallest leak |
| - | ECM-430D | Leak diagnostic. Small leak |
| P1440 | ECM-4338 | Fuel tank filler cap missing |
| P0420, P0422 | ECM-4801 | Three-way catalytic converter (TWC) efficiency. Intermittent fault |
| P0420, P0422 | ECM-4801 | Three-way catalytic converter (TWC) efficiency. Permanent fault |
| P0530, P0531 | ECM-5000 | Air conditioning (A/C) pressure sensor. Signal missing. Intermittent fault |
| P0530, P0531 | ECM-5000 | Air conditioning (A/C) pressure sensor. Signal missing. Permanent fault |
| P0533 | ECM-5000 | Air conditioning (A/C) pressure sensor. Signal too high. Intermittent fault |
| P0533 | ECM-5000 | Air conditioning (A/C) pressure sensor. Signal too high. Permanent fault |
| P0532 | ECM-5000 | Air conditioning (A/C) pressure sensor. Signal too low. Intermittent fault |
| P0532 | ECM-5000 | Air conditioning (A/C) pressure sensor. Signal too low. Permanent fault |
| P0500, P0502, P0504 | ECM-510F | Vehicle speed signal |
| P0863, P1631 | ECM-530B | Control module communication |
| P0700, P1618 | ECM-530D | Diagnostic Trouble Code (DTC) in another control module |
| P0602 | ECM-531D | Control module, internal fault |
| P0645, P0647, P1647 | ECM-6000 | Air conditioning (A/C) relay signal. Signal too high. Permanent fault |
| P0645, P0646, P1646 | ECM-6000 | Air conditioning (A/C) relay signal. Signal too low. Intermittent fault |
| P0645, P0646, P1646 | ECM-6000 | Air conditioning (A/C) relay signal. Signal too low. Permanent fault |
| P0645 | ECM-6000 | Air conditioning (A/C) relay signal. Signal missing. Intermittent fault |
| P0645 | ECM-6000 | Air conditioning (A/C) relay signal. Signal missing. Permanent fault |
| P0645, P0647, P1647 | ECM-6000 | Air conditioning (A/C) relay signal. Signal too high. Intermittent fault |
| P0480, P0483, P0484, P0485, P0691, P1480 | ECM-6100 | Engine cooling fan control module. Faulty signal. Intermittent fault |
| P0480, P0483, P0484, P0485, P0691, P1480 | ECM-6100 | Engine cooling fan control module. Faulty signal. Permanent fault |
| P1481 | ECM-6110 | Electric cooling fan relay. No signal. Intermittent fault |
| P1482 | ECM-6110 | Electric cooling fan relay. No signal. Permanent fault |
| P1482 | ECM-6110 | Electric cooling fan relay. Signal too high. Intermittent fault |
| P1482 | ECM-6110 | Electric cooling fan relay. Signal too high. Permanent fault |
| P1481 | ECM-6110 | Electric cooling fan relay. Signal too low. Intermittent fault |
| P1481 | ECM-6110 | Electric cooling fan relay. Signal too low. Permanent fault |
| P0010, P0013 | ECM-6440 | Camshaft reset valve. Signal missing. Intermittent fault |
| P0010, P0013 | ECM-6440 | Camshaft reset valve. Signal missing. Permanent fault |
| P1650, P1656 | ECM-6440 | Camshaft reset valve. Signal too high. Intermittent fault |
| P1650, P1656 | ECM-6440 | Camshaft reset valve. Signal too high. Permanent fault |
| P1649, P1655 | ECM-6440 | Camshaft reset valve. Signal too low. Intermittent fault |
| P1649, P1655 | ECM-6440 | Camshaft reset valve. Signal too low. Permanent fault |
| P0011 | ECM-644A | Camshaft reset valve. Faulty control |
| P0014 | ECM-644A | Camshaft reset valve. Faulty position |
| P0011, P0014 | ECM-644A | Camshaft reset valve. Slow control. Intermittent fault |
| P0011, P0014 | ECM-644A | Camshaft reset valve. Slow control. Permanent fault |
| P0243 | ECM-6800 | Turbocharger (TC) control valve. Signal missing. Intermittent fault |
| P0243 | ECM-6800 | Turbocharger (TC) control valve. Signal missing. Permanent fault |
| P0246 | ECM-6800 | Turbocharger (TC) control valve. Signal too high. Intermittent fault |
| P0246 | ECM-6800 | Turbocharger (TC) control valve. Signal too high. Permanent fault |
| P0245 | ECM-6800 | Turbocharger (TC) control valve. Signal too low. Intermittent fault |
| P0245 | ECM-6800 | Turbocharger (TC) control valve. Signal too low. Permanent fault |
| P0234 | ECM-6805 | Turbocharger (TC) control valve. Pressure too high. Permanent/Intermittent fault |
| P1238 | ECM-6806 | Turbocharger (TC) control system flow fault. Flow too high. Permanent/Intermittent fault |
| P1237 | ECM-6806 | Turbocharger (TC) control system flow fault. Flow too low. Permanent/Intermittent fault |
| P0650 | ECM-6B00 | Malfunction indicator lamp (MIL) signal. Signal missing. Intermittent fault |
| P0650 | ECM-6B00 | Malfunction indicator lamp (MIL) signal. Signal missing. Permanent fault |
| P0650, P1626 | ECM-6B00 | Malfunction indicator lamp (MIL) signal. Signal too high. Intermittent fault |
| P0650, P1626 | ECM-6B00 | Malfunction indicator lamp (MIL) signal. Signal too high. Permanent fault |
| P0650, P1625 | ECM-6B00 | Malfunction indicator lamp (MIL) signal. Signal too low. Intermittent fault |
| P0650, P1625 | ECM-6B00 | Malfunction indicator lamp (MIL) signal. Signal too low. Permanent fault |
| P1632 | ECM-710A | Real time clock |
| P1637 | ECM-715D | Temperature sensor control module |
| P1638 | ECM-716D | Temperature sensor control module |
| P0668, P0669, P1635, P1636 | ECM-7180 | Temperature sensor control module. Signal too high/Signal too low. Intermittent fault |
| P0668, P0669, P1635, P1636 | ECM-7180 | Temperature sensor control module. Signal too high/Signal too low. Permanent fault |
| P0630, P1680 | ECM-720A | Immobilizer communication. Faulty signal. Intermittent fault |
| P0630, P1680 | ECM-720A | Immobilizer communication. Faulty signal. Permanent fault |
| P1680 | ECM-720A | Immobilizer communication. Signal missing. Intermittent fault |
| P1680 | ECM-720A | Immobilizer communication. Signal missing. Permanent fault |
| P0560, P0562 | ECM-8010 | System relay output. Faulty signal. Intermittent fault |
| P0560, P0562 | ECM-8010 | System relay output. Faulty signal. Permanent fault |
| P0563 | ECM-8010 | System relay output. Signal too high. Intermittent fault |
| P0563 | ECM-8010 | System relay output. Signal too high. Permanent fault |
| P0562 | ECM-8010 | System relay output. Signal too low. Intermittent fault |
| P0562 | ECM-8010 | System relay output. Signal too low. Permanent fault |
| P0643, P1673 | ECM-8410 | 5 volt power supply. Signal too high. Intermittent fault |
| P0643, P1673 | ECM-8410 | 5 volt power supply. Signal too high. Permanent fault |
| P0642, P1672 | ECM-8410 | 5 volt power supply. Signal too low. Intermittent fault |
| P0642, P1672 | ECM-8410 | 5 volt power supply. Signal too low. Permanent fault |
| - | ECM-901A | Engine control module (ECM) communication. Faulty communication |
| P1628, P1629 | ECM-901A | Communication control module, communication problems. Faulty signal. Permanent fault-901A Engine control module (ECM) communication. Communication fault |
| - | ECM-901E | Engine control module (ECM). Internal fault |
| - | ECM-901E | Engine control module (ECM). Internal fault |
| P1611 | ECM-902A | Communication with throttle unit. Signal missing |
| - | ECM-902A | Communication with throttle unit. Signal too high |
| P1612 | ECM-902A | Throttle unit communication. Signal too low |
| - | ECM-903C | Reconfiguration emission system. Information |
| P1610 | ECM-903F | Throttle position (TP). Signal too high |
| P1608, P1609 | ECM-903F | Throttle position (TP). Signal too low/Signal missing |
| P0121 | ECM-904C | Reconfiguration emission system. Information |
| P0121 | ECM-904C | Throttle position (TP) sensor 1 and 2. Faulty signal |
| - | ECM-904D | Text message. Information |
| P1604 | ECM-910E | Throttle valve. Internal fault |
| P1604 | ECM-910E | Throttle valve. Internal fault |
| P1605 | ECM-911A | Throttle unit communication. Faulty communication |
| P1606 | ECM-912A | Communication with the engine control module (ECM). Signal missing |
| P1614 | ECM-913F | Throttle position (TP). Non plausible request |
| P0221 | ECM-914F | Throttle position (TP) sensor 1 and 2. Faulty signal |
| P0220 | ECM-9150 | Throttle position (TP) sensor 1. Faulty signal |
| P0225 | ECM-9160 | Throttle position (TP) sensor 2. Faulty signal |
| P1520 | ECM-917F | Accelerator pedal position. Faulty signal |
| P1520 | ECM-9180 | Accelerator pedal (AP) position sensor. Faulty signal |
| P1600 | ECM-9190 | Throttle position (TP). Faulty current |
| P1603 | ECM-91A7 | Throttle position (TP). Faulty control |
| P1602 | ECM-91B7 | Throttle position (TP). Faulty position |
| P1528 | ECM-91CF | Brake pedal position. Faulty signal |
| P1525 | ECM-91DF | Brake pedal position. Faulty position |
| P1607 | ECM-91E0 | Throttle valve. Too high supply voltage |
| P1601 | ECM-91F0 | Throttle position (TP). Faulty current |
| P1562, P1662 | ECM-928C | Cruise Control. Signal missing. Intermittent fault |
| P1562, P1662 | ECM-928C | Cruise Control. Signal missing. Permanent fault |
| P1560, P1660 | ECM-928C | Cruise Control. Signal too high. Intermittent fault |
| P1560, P1660 | ECM-928C | Cruise Control. Signal too high. Permanent fault |
| P1561, P1661 | ECM-928C | Cruise Control. Signal too low. Intermittent fault |
| P1561, P1661 | ECM-928C | Cruise Control. Signal too low. Permanent fault |
| P0805, P0807, P0808 | ECM-9300 | Clutch pedal position sensor, faulty signal. Signal too high. Intermittent fault |
| P0805, P0807, P0808 | ECM-9300 | Clutch pedal position sensor, faulty signal. Signal too high. Permanent fault |
| P0805, P0807, P0808 | ECM-9300 | Clutch pedal position sensor, faulty signal. Signal too low. Intermittent fault |
| P0805, P0807, P0808 | ECM-9300 | Clutch pedal position sensor, faulty signal. Signal too low. Permanent fault |
| P0805, P0807, P0808 | ECM-9300 | Clutch pedal position sensor. Faulty signal. Intermittent fault |
| P0805, P0807, P0808 | ECM-9300 | Clutch pedal position sensor. Faulty signal. Permanent fault |
| P0572, P0573, P1513 | ECM-9400 | Brake pedal position sensor, faulty signal. Signal too high. Intermittent fault |
| P0572, P0573, P1513 | ECM-9400 | Brake pedal position sensor, faulty signal. Signal too high. Permanent fault |
| P0572, P0573, P1513 | ECM-9400 | Brake pedal position sensor, faulty signal. Signal too low. Intermittent fault |
| P0572, P0573, P1513 | ECM-9400 | Brake pedal position sensor, faulty signal. Signal too low. Permanent fault |
| P0571, P0572, P0573, P1513 | ECM-9400 | Brake pedal position sensor. Faulty signal. Intermittent fault |
| P0571, P0572, P0573, P1513 | ECM-9400 | Brake pedal position sensor. Faulty signal. Permanent fault |
| P0571, P0573, P1513 | ECM-9400 | Brake pedal position sensor. Signal missing. Intermittent fault |
| P0571, P0573, P1513 | ECM-9400 | Brake pedal position sensor. Signal missing. Permanent fault |
| P0222, P0223 | ECM-9520 | Accelerator pedal (AP) position sensor, faulty signal. Signal too low. Intermittent fault |
| P0222, P0223 | ECM-9520 | Accelerator pedal (AP) position sensor, faulty signal. Signal too low. Permanent fault |
| P0222, P0223 | ECM-9520 | Accelerator pedal (AP) position sensor. Faulty signal. Intermittent fault |
| P0222, P0223 | ECM-9520 | Accelerator pedal (AP) position sensor. Faulty signal. Permanent fault |
| P0122, P0123 | ECM-9530 | Accelerator pedal (AP) position sensor, faulty signal. Signal too high. Intermittent fault |
| P0122, P0123 | ECM-9530 | Accelerator pedal (AP) position sensor, faulty signal. Signal too high. Permanent fault |
| P0122 | ECM-9530 | Accelerator pedal (AP) position sensor, faulty signal. Signal too low. Intermittent fault |
| P0122 | ECM-9530 | Accelerator pedal (AP) position sensor, faulty signal. Signal too low. Permanent fault |
| P0228 | ECM-9540 | Accelerator pedal sensor. Signal too high. Intermittent fault |
| P0228 | ECM-9540 | Accelerator pedal sensor. Signal too high. Permanent fault |
| P0227 | ECM-9540 | Accelerator pedal sensor. Signal too low. Intermittent fault |
| P0227 | ECM-9540 | Accelerator pedal sensor. Signal too low. Permanent fault |
| P0120 | ECM-958F | Accelerator pedal sensor. Faulty signal |
| P0124 | ECM-959F | Accelerator pedal sensor. Faulty signal |
| - | ECM-980A | Torque-limiting. Information |
| - | ECM-980A | Torque-limiting. Information |
| P1651 | ECM-981A | Torque. Too high torque |
| P1651 | ECM-981A | Torque. Too high torque |
| P1652 | ECM-982A | Air mass. Level too low |
| P0506, P0507 | ECM-990A | Idle air trim. Speed too high/low |
| P0600 | ECM-E000 | Control module communication. Faulty communication |
| P1630 | ECM-E003 | Configuration fault. Faulty configuration |
| - | ECM-XXXX | Unknown diagnostic trouble code (DTC) for the current control module version |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.