Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2001 Volvo V40FACTORY OEM SERVICE PROCEDURE
Option (2000-2004): Option
CHECK THE FOLLOWING FROM INSIDE THE CAR
| Interior rear view mirror and door mirrors | Check that the mirror glass is undamaged. Check that the mirror can be moved to the anti-dazzle position. Check the mirror mounting. If the car is equipped with power door mirrors, check the function. |
| Glove compartment lighting | Check the function. |
| Courtesy lighting | Check the function. |
| Indicator lamps | Check the function of all control and warning lamps. |
| Instrument lighting | Check the function and that the lighting strength can be controlled. |
| Climate control, heater control and fan | Check function switch. |
| Rear windshield demister | Check that the lamp in the switch functions. |
| Signal | Check the function. |
| Turn signal lamps | Check the function and the low beam setting. |
| High and low beams | Check the function and the low beam setting |
| Seat belts | Jerk the seat belt and check the locking function. Inspect the seat belt, mountings and buckles for any signs of wear or damage. Check that the warning system functions. |
CHECK THE FOLLOWING FROM OUTSIDE THE CAR
| Exterior lighting and reflectors and any fog lamps, front and rear | Check the function and for any damage. Check the headlamp beam alignment. |
| License plate, front and rear | Check the mounting. Check for any damage. Check the function of the license plate lamps. |
| Body and glass | Check the condition of the windshield and for any defects in the other windows. Inspect for bodywork damage that needs correcting or touching up. |
| Doors | Check the function of all the door locks, hinges and doorstops. Check the weatherstrips, lock facings and window lift mechanisms. |
| Door mirrors | Check the mountings. Check that the glass is undamaged. Test the fold function. |
| Wheels, tires and mudguards | Check and/or adjust the tire pressure. Check the condition of the rims. Check that the mudguards are correctly secured. |
| gasoline/diesel heaters (where applicable) | Check the function. |
RECOMMENDATIONS TO THE CUSTOMER
| Battery replacement | Replace the batteries every other year. This applies to equipment such as remote control etc. |
| Power antenna | Clean and lubricate at every service. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
