2001 Volvo S80 BaseFACTORY OEM SERVICE PROCEDURE

Anti-Lock Brake System (Abs) DTCS

ANTI-LOCK BRAKE SYSTEM (ABS) - DTC INDEX

DTC Description
ABS-0010 Left front wheel sensor. Signal missing. Intermittent fault
ABS-0010 Left front wheel sensor. Signal missing. Permanent fault
ABS-0011 Left front wheel sensor. Faulty signal
ABS-0012 Left front wheel sensor Faulty signal
ABS-0020 Right front wheel sensor. Signal missing. Intermittent fault
ABS-0020 Right front wheel sensor. Signal missing. Permanent fault
ABS-0021 Right front wheel sensor. Faulty signal
ABS-0022 Front right wheel sensor. Faulty signal
ABS-0030 Left rear wheel sensor Signal missing. Intermittent fault
ABS-0030 Left rear wheel sensor Signal missing. Permanent fault
ABS-0031 Left rear wheel sensor. Faulty signal
ABS-0032 Left rear wheel sensor. Faulty signal
ABS-0040 Right rear wheel sensor. Signal missing. Intermittent fault
ABS-0040 Right rear wheel sensor. Signal missing. Permanent fault
ABS-0041 Right rear wheel sensor. Faulty signal
ABS-0042 Right rear wheel sensor. Faulty signal
ABS-0065 Stop (brake) light switch. Faulty signal. Intermittent fault
ABS-0065 Stop (brake) light switch. Faulty signal. Permanent fault
ABS-0066 Front brake discs. Temperature too high
ABS-0070 Pump motor. Faulty signal. Intermittent fault
ABS-0070 Pump motor. Faulty signal. Permanent fault
ABS-0072 Control module. Internal fault. Intermittent fault
ABS-0072 Control module. Internal fault. Permanent fault
ABS-0074 Battery voltage. Voltage too low. Intermittent fault
ABS-0074 Battery voltage. Voltage too low. Permanent fault
ABS-0075 Control module. Internal fault. Intermittent fault
ABS-0075 Control module. Internal fault. Permanent fault
ABS-0076 Control module. Faulty configuration
ABS-0077 Battery voltage. Voltage too high. Intermittent fault
ABS-0077 Battery voltage. Voltage too high. Permanent fault
ABS-0080 Control module. Faulty signal. Intermittent fault
ABS-0080 Control module. Faulty signal. Permanent fault
ABS-0091 Control module communication. Control module communication
ABS-0092 Control module communication. Control module communication
ABS-0093 Control module communication. Control module communication
ABS-0094 Control module communication. Control module communication
ABS-0095 Control module communication. Control module communication. Intermittent fault
ABS-0095 Control module communication. Control module communication. Permanent fault
ABS-0097 Control module. Excessive configuration time
ABS-00A0 Yaw-velocity sensor 1. Signal faulty. Intermittent fault
ABS-00A0 Yaw-velocity sensor 1. Signal faulty. Permanent fault
ABS-00A1 Yaw rate sensor 1 & 2. Signal outside its permitted range
ABS-00A2 Side acceleration sensor. Signal faulty. Intermittent fault
ABS-00A2 Side acceleration sensor. Signal faulty. Permanent fault
ABS-00A3 Side acceleration sensor. Unreasonable signal
ABS-00A4 Brake pressure sensor 1. Signal faulty. Intermittent fault
ABS-00A4 Brake pressure sensor 1. Signal faulty. Permanent fault
ABS-00A5 Brake pressure sensor 2. Signal faulty. Intermittent fault
ABS-00A5 Brake pressure sensor 2. Signal faulty. Permanent fault
ABS-00A6 Brake pressure sensor 1 & 2. Signal outside its permitted range
ABS-00A7 Power supply sensor. Signal faulty. Intermittent fault
ABS-00A7 Sensor power supply. Signal faulty. Permanent fault
ABS-00B0 Brake amplifier pre-pressure valve Signal faulty. Intermittent fault
ABS-00B0 Brake amplifier pre-pressure valve Signal faulty. Permanent fault
ABS-00B1 Pedal pressure sensor. Signal faulty. Intermittent fault
ABS-00B1 Pedal pressure sensor. Signal faulty. Permanent fault
ABS-00B2 Yaw-velocity sensor 2. Signal faulty. Intermittent fault
ABS-00B2 Yaw-velocity sensor 2. Signal faulty. Permanent fault
ABS-00B3 Communication control unit SAS signal. Unreasonable signal
ABS-00B4 Communication control unit SAS control unit not initiated
ABS-00B5 Communication control unit SAS signal quality
ABS-00B6 Communication control unit Internal fault in CAN or SAS
ABS-00B7 Communication control unit Incorrect wheel alignment or steering angle
ABS-00C0 Stabilizing function. AYC stabilization takes too long
ABS-00C1 Stabilizing function. Incorrect wheel alignment or steering wheel positioning
ABS-00C2 Reversing signal. Unreasonable signal
ABS-00C3 Reversing signal. No signal
ABS-00C4 Control unit. Internal fault
ABS-00C7 DSTC Factory test. The testing cycle is not approved
ABS-90 Control module. Internal fault. Permanent fault
ABS-XXXX Unknown diagnostic trouble code (DTC) for the current control module version
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.