2001 Volvo S60 T-5, StandardFACTORY OEM SERVICE PROCEDURE

Vehicle Series Code - Position 8

The 8th number in VIN is the emissions code. Description is as follows:

  1. 5 (S40 & V40)

    Without EGR, without air pump, equipped with OBDII, sequential EFI, variable valve timing, close-coupled catalyst, underfloor catalyst, Siemens engine management, Running Loss (RuLo) EVAP system, On-board Refueling Vapor Recovery (ORVR).

  2. N (S60 & V70, Engine code 61)

    Without EGR, without air pump, equipped with OBDII, sequential EFI, variable valve timing, manifold close-coupled catalyst, Denso engine management, Running Loss (RuLo) EVAP system, On-board Refueling Vapor Recovery (ORVR).

  3. D (S60, V70, V70, S80, Engine codes 53, 56, 58, 90)

    Without EGR, without air pump, equipped with OBDII, sequential EFI, variable valve timing, three-way catalyst, Bosch ME 7.0 engine management, Running Loss (RuLo) EVAP system, On-board Refueling Vapor Recovery (ORVR).

  4. S80 (Engine code 94)

    Without EGR, without air pump, equipped with OBDII, sequential EFI, variable valve timing, close-coupled catalyst, underfloor catalyst, Bosch ME 7.0 engine management, Running Loss (RuLo) EVAP system, On-board Refueling Vapor Recovery (ORVR).

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.