Removal & Installation

1994 Volvo 940 Base, 4D Sedan, AW71SECTION Removal & Installation
Applies ToNoteStandard HoursWarranty HoursSkill Level
3.0C
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
Rear0.6B
Combination Procedure: FLYWHEEL: Remove & Replace:
0.3C
Combination Procedure: TORQUE CONVERTER: Replace:
0.2C
Combination Procedure: TRANS OIL PUMP: Replace:
Front0.6B
Combination Procedure: TRANS OIL PUMP SEAL: Replace:
Front0.4B
Combination Procedure: TRANS OIL PUMP SEAL & BUSHING: Replace:
Front0.5B
Combination Procedure: TRANSMISSION ASSEMBLY: Replace:
1.2C
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.