1992 Volvo 940 GL, AW70LFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 2.68 LBS. 1.21 KG R-12 S
Automatic Transmission Fluid 2.3L Eng 7.90 QTS. 7.47 L Automatic Transmission Fluid DEXRON IID S
Brake Fluid 2.3L Eng 0.66 QTS. 0.62 L DOT 4 or DOT 4+ Brake Fluid S
Differential Gear Oil 2.3L Eng 1.70 QTS. 1.6 L API - GL-5, SAE 90W or 80W-90 (MiL-L-2105 B or C) S
Engine Coolant 2.3L Eng 10.00 QTS. 9.46 L 50/50 mixture of VOLVO Antifreeze/Coolant and water S
Engine Oil 2.3L Eng w/Filter 4.00 QTS. 3.78 L API - SG/CD, SAE 10W-30 (-4Deg.F to Above 104Deg.F) S
Engine Oil 2.3L Eng w/Oil Cooler 4.70 QTS. 4.44 L API - SG/CD, SAE 10W-30 (-4Deg.F to Above 104Deg.F) S
Fuel Tank 2.3L Eng 15.80 GALS. 59.8 L S
Power Steering Fluid 2.3L Eng 0.70 QTS. 0.66 L Automatic Transmission Fluid Type F S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.