1989 Volvo 780 GLE, AW71FACTORY OEM SERVICE PROCEDURE

Engine Performance: Specifications: Capacities

BATTERY SPECIFICATIONS

Application Amp Hr. Rating
Except 240 DL/GL (1) 450
240 DL/GL 60
(1) Cold cranking amp rating.
FLUID CAPACITIES

Application Qts. (L)
Crankcase (Includes Filter)
Except 760 GLE (1) 4.0 (3.9)
760 GLE 6.3 (6.0)
Cooling System (Includes Heater)
740 DL/GL, 740 GL, 740 Turbo & 760 Turbo 9.0 (8.5)
740 GLE 10.0 (9.5)
760 GLE 10.5 (10.0)
Man. Transmission (ATF Type F)
740 GL, 740 GLE, 740 Turbo
M46 2.4 (2.3)
M47 1.6 (1.5)
240 DL/GL
M47 II 1.6 (1.5)
Auto. Transmission (Dexron II D)
Except 240 DL/GL 7.9 (7.5)
240 DL/GL 7.8 (7.4)
Differential (SAE 80W-90/API GL-5)
1030
240 DL/GL 1.4 (1.3)
1031
All Models 1.7 (1.6)
(1) On 760 Turbo, if oil cooler is drained, add 4.7 qts. (4.5L).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.