Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Misfire: Distributor Cap Inspection (VOL0199AP)
Reference number: VOL0199AP
ENGINE MISFIRE: DISTRIBUTOR CAP INSPECTION
TECHNICAL INFORMATION TIP
ENGINE MISFIRE - DISTRIBUTOR CAP INSPECTION
Year(s): All Years
Manufacturer: Volvo
Model(s): 700 Series
ISSUE & TIP
On 700 series Volvos, the protective cover over the distributor cap can cause a slight engine misfire. Remove the distributor cover, then check for black streaks inside the cover that would indicate that secondary ignition sparks are jumping to the cover. Replace any damaged ignition components.
Courtesy of Import Service Magazine
with thanks to:
Vernon Miller
Miller Repair
Stantonville, Tennessee
REFERENCE NUMBER
VOL0199AP
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
