Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2019JETTA GLI AUTOBAHN, STANDARD TRANSREPAIR AND DIAGNOSISQUICK LOOKUPSFLUIDS
2019 Volkswagen Jetta GLI Autobahn, Standard Trans
Quick Lookups: Fluids
2019 Volkswagen Jetta GLI Autobahn, Standard TransSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Denso | 3.70 OZS. | 0.1 L | Part No. G 052 535 M2. Part numbers are for reference only. Approximate capacity. | S | ||
| Air Cond Compressor Oil | Sanden | 2.50 OZS. | 0.07 L | Part No. G 052 535 M2. Part numbers are for reference only. Approximate capacity. | S | ||
| Air Cond Refrigerant | 1.15 LBS. | 0.52 KG | R-1234yf | S | |||
| Brake Fluid | 1.30 QTS. | 1.23 L | Part No. B 000 750 M3. Part numbers are for reference only. Approximate capacity. | S | |||
| Engine Coolant | 10.50 QTS. | 9.93 L | Part No. G 013 A8J M1. Part numbers are for reference only. Approximate capacity. | S | |||
| Engine Oil | 2.0L Eng | w/Filter | 6.00 QTS. | 5.67 L | Castrol EDGE Professional SAE 0W-20 Long Life IV. VW 508 00 | Refer to Technical Bulletin 2012855 for engine oils meeting the required VW oil quality standards. Part numbers are for reference only. Approximate capacity. | S |
| Windshield Washer Fluid | N/A | N/A | Part No. G 052 164 M2. Part numbers are for reference only. Fluid Capacity is between: 3.1 - 5.2 qts. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.