2012 Volkswagen Routan SFACTORY OEM SERVICE PROCEDURE

Win Module Identification (CTT 28-12-01)

Publication date: 2014-03-06
Reference number: CTT 28-12-01

WIN MODULE IDENTIFICATION

WIN MODULE IDENTIFICATION

TECH TIPS - CANADA

Reference Number(s): CTT 28-12-01, Date of Issue:  March 6, 2014
VOLKSWAGEN: 2009 - 2012 Routan
GROUP: 28 - Ignition, Glow Plug System

SERVICE INFORMATION

2009 - 2012 Routan - WIN Module Identification 

Before ordering or replacing the vehicle WIN module the following should be verified:

  1. Does the vehicle currently have a remote start system?
  2. Was the vehicle involved in 28G1, and has the win module update been performed?
  3. Use the WIN module chart below to properly identify the VW part number needed.
  4. Using the Wi-Tech scan tool, identify the WIN module Chrysler part number.
  5. Match Chrysler part number to VW part number on the table below.
NOTE: If the suggested part is superseded in Parts On Command, order the latest supersession
WIN MODULE CHART

Model Year Chrysler PN from StarMOBILE Order VW PN PR- Description NOTES
MY 2009 05026874A(1) 7B0-907-335-K 4K4 With remote start Or if Remote Start Accessory was installed
05026875A(1) 7B0-907-335-L 4F2 Without remote start  
MY2010 05026874A(1) 7B0-907-335-K 4K4 With remote start (1)Check Elsa Web for open 28G1 campaign. If still open do not replace with 7B0-907-335-K
05026875A(1) 7B0-907-335-L 4F2 Without remote start (1)Check Els a Web for open 28G1 campaign. If still open do not replace with 7B0-907-335-L
68066727A(1) 7B0-907-335-R 4K4 With remote start Or if Remote Start Accessory was installed
68066729A(1) 7B0-907-335-S 4F2 Without remote start  
MY2011 68068863A(1) 7B0-905-849 4K4 With remote start Or if Remote Start Accessory was installed
68068868A(1) 7B0-905-849-A 4K0 Without remote start  
MY2012 68068863A(1) 7B0-905-349-E 4I3 With remote start and KE5SY Or if Remote Start Accessory was installed
68068868A(1) 7B0-905-849-C 4K0 Without remote start or KESSY  
(1) For MY 2010 vehicles. If 28G1 campaign is still open and has not been performed DO NOT use 7B0-907-335-K or 7B0-907-335-L to replace the WIN module. Refer to 28G1 repair bulletin in Elsa Web.
NOTE: If suggested part is superceded, order the replacmeent.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.