2012 Volkswagen Beetle (5C1) L5-2.5L (CBTA)FACTORY OEM SERVICE PROCEDURE

Keyless Entry - Inoperative After KESSY Module Replacement

96 12 05

May 10, 2012

2026177 Supersedes TB V961102 dated April 18, 2011 to include additional models and model year applicability.

Factory service manual diagram




Vehicle Information

Condition

Keyless Entry Inoperative after Access / Start (KESSY) Module Replacement
After replacing the KESSY module, the keyless entry does not work.

Factory service manual diagram




One or both of the following DTCs is logged:

Technical Background

The KESSY module service parts programmed incorrectly resulting in lack of functionality.

Production Solution

Not applicable.

Service

Update Programming Procedure:

Tip:
To Update-Programming using SVM, review and follow instructions in Technical Bulletin Instance 2014603 "Software Version Management".
The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim.

Note:

Prior to launching VAS-PC application and starting control module update process, confirm tester screen saver and power settings in accordance with Special Tools and Equipment - Service Information Circular # VSE-08-18.
Failure to do so may result in the tester entering power save mode during data transfer, and subsequent control module failure.

When using a VAS 6150, 5051B or 5052A tester in conjunction with a VAS 5054A wireless transmitter head for a flash procedure, please connect a USB cable between the transmitter head and the tester. Failure to
do so may lead to errors during the flash procedure.

- Update KESSY Control Module using SVM code 34E8.

Factory service manual diagram




Warranty

Required Parts and Tools

Factory service manual diagram




No Special Parts required.

Additional Information

All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.