2010 Volkswagen Routan SFACTORY OEM SERVICE PROCEDURE

Proper Win Module Identification Before Replacement (V281202)

Publication date: 2015-09-11
Reference number: V281202
Supersedes refnos: 2028548, GROUP 28, NO. 12-02, GROUP 28, NO. 15-01

PROPER WIN MODULE IDENTIFICATION BEFORE REPLACEMENT

PROPER WIN MODULE IDENTIFICATION BEFORE REPLACEMENT

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 28, NO. 15-01 (2028548), Date of Issue:  September 11, 2015
VOLKSWAGEN: 2009-2014 Routan
GROUP: 28 - Ignition System
Superceded Bulletin(s): GROUP 28, NO. 12-02, Date of Issue:  June 22, 2015
APPLICABLE MODELS AND YEARS

Model(s) Year Eng. Code Trans. Code VIN Range From VIN Range To
Routan 2009-2014 All All All All

CONDITION

28 15 01  September 11, 2015 2028548  Supersedes Technical Bulletin V281202 dated June 22, 2015 to add additional model years, latest WIN kit part numbers and required wiTECH software level 13-04-18.

Proper WIN Module Identification before Replacement 

Proper WIN Module identification after Remote Start installation, or Safety Recall 28H1.

TECHNICAL BACKGROUND

The WIN module may have been replaced previously to upgrade vehicle with remote start options, or involved in Safety Recall 28G1 or 28H1 for MY2009-2010.

PRODUCTION SOLUTION

NA.

SERVICE

NOTE: If the WIN module has been previously replaced, ETKA may not list the latest module needed to replace the current WIN module in the vehicle.
  • Before ordering or replacing the vehicle WIN module the following should be verified:

Does the vehicle currently have a remote start system?

Is the vehicle involved in previous Safety Recall 28G1 or latest Safety Recall 28H1, and has the WIN module update been performed?

Use the WIN module chart below to properly identify the Volkswagen part number needed.

Using the wiTECH Desktop Client, identify the WIN module Chrysler part number.

Match the Chrysler part number to Volkswagen part number.

NOTE: If the vehicle was repaired previously with Safety Recall 28G1 The detent ring MUST be discarded. DO NOT reinstall the detent ring after replacing the WIN module.
G10094725
NOTE: If the suggested part is superseded in Parts On Command, always order the latest supersession.
Model Year Chrysler PN from wiTECH Desktop Client Order VW PN PR- Description NOTES
MY 2009 05026874A(1) 7B0998021T
(7 Button)
7B0998021AA
(6 Button)		 Gx1-4K4-4E9
GX1-4K4-4E0		 WIN Module + Keys
With remote start		 Or if Remote Start Accessory was installed
05026875A(1) 7B0998021Q
(3 Button)
7B0998021R
(5 Button)
7B0998021S
(6 Button)		 GX0+4F2+4E0
GX1+4F2+4E0
GX1+4F2+4E9		 WIN Module + Keys
Without remote start		  
MY2010
>>06.06.2010		 05026874A(1) 7B0998021T
(7 Button)
7B0998021AA
(6 Button)		 Gx1-4K4-4E9
GX1-4K4-4E0		 WIN Module + Keys
With remote start		 Or if Remote Start Accessory was installed
05026875A(1) 7B0998021Q
(3 Button)
7B0998021R
(5 Button)
7B0998021S
(6 Button)		 GX0+4F2+4E0
GX1+4F2+4E0
GX1+4F2+4E9		 WIN Module + Keys
Without remote start		  
MY2010
07.06.2010>>		 68066727A(1) 7B0905843F GX1+4K4+4E0 WIN Module
With remote start		 Or if Remote Start Accessory was installed
68066729A(1) 7B0907335S 4F2 WIN Module
Without remote start		  
MY2011 68068863A(1) 7B0905849F 4K4 WIN Module
With remote start		 Or if Remote Start Accessory was installed
68068868A(1) 7B0905849G 4K0 WIN Module
Without remote start		  
MY2012 68068863A(1) 7B0905849F 4I3 WIN Module
With remote start		 Or if Remote Start Accessory was installed
68068868A(1) 7B0905849G 4K0 WIN Module
Without remote start		  
MY2013 68105743A(1) 7B0905849M 4I3 WIN Module
With remote start		 Or if Remote Start Accessory was installed
68158218A(1) 7B0905849N 4K0 WIN Module
Without remote start		  
MY2014 68105743A(1) 7B0905849M 4I3 WIN Module
With remote start		 Or if Remote Start Accessory was installed
68158218A(1) 7B0905849N 4K0 WIN Module
Without remote start		  
(1) For MY 2009 2010 vehicles: If Safety Recall 28H1 is still open and has not been performed, Refer to Safety Recall 28H1 in Elsa or Service Net.

WARRANTY

Information Only.

REQUIRED PARTS AND TOOLS

Tip: 

For required parts use the table above and refer to Parts On Command for the latest supersession.

TOOL INFORMATION

Tool Description Tool No:
Midtronics Battery Tester/Charger InCharge 940 (INC-940) or GRX 3000 VAS
StarMOBILE Tester Kit or VW MICRO POD Tester Kit CH9401 (SW level 10.01.23 or higher) VWMICROPOD
wiTECH Desktop Client (Software level 13.04.18 or higher)

ADDITIONAL INFORMATION

All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information. 

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.