Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2003EUROVAN V6-2.8L (AXK)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEENGINE MOUNT
2003 Volkswagen Eurovan V6-2.8L (AXK)
Engine Mount
2003 Volkswagen Eurovan V6-2.8L (AXK)SECTION Engine Mount
Engine Tightening Specifications
Threaded Connection Tightening Torque
Subframe Mount Tightening Specifications
- (Bolts oiled)
Right subframe mount:
- A 55 Nm
- B 50 Nm
- + 1/4 rotation (90 °)
- C 10 Nm
Left subframe mount:
- A 55 Nm
- B 50 Nm
- + 1/4 rotation (90 °)
- C 50 Nm
- + 1/4 rotation (90 °)
- D 30 Nm
Pendulum support
1. Pendulum support to subframe (1) 200 Nm
(1) Replace bolts.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.