Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2002EUROVAN BASEREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMENGINE CONTROLS - SYSTEM & COMPONENT TESTINGOUTPUT DIAGNOSTIC TEST MODEEUROVAN 2.8L VR6, ENGINE CODE AXK
2002 Volkswagen EuroVan Base
EUROVAN 2.8L VR6, Engine Code AXK
2002 Volkswagen EuroVan BaseSECTION EUROVAN 2.8L VR6, Engine Code AXK
NOTE:
Output Diagnostic Test Mode is performed with ignition on engine off, unless specified differently in component sequence list.
Output Diagnostic Test Mode for EuroVan 2.8L VR6 engine code AXK, activates the following components in given sequence:
- EVAP Canister Purge Valve (N80)
- Secondary Air Injection Valve (N112)
- Secondary Air Injection Pump Relay (J299)
- Intake Manifold Tuning Valve (N156)
- Valve 1 For Camshaft Adjustment (N205)
- EVAP Leak Detection Pump (V144)
- Valve 2 For Camshaft Adjustment (N208)
- Injector, Cylinder 1 (N30)
- Injector, Cylinder 5 (N83)
- Injector, Cylinder 3 (N32)
- Injector, Cylinder 6 (N84)
- Injector, Cylinder 2 (N31)
- Injector, Cylinder 4 (N33)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.