1996 Volkswagen Passat GLS, AutomaticFACTORY OEM SERVICE PROCEDURE

Engine Controls - Specifications: Capacities

BATTERY SPECIFICATIONS

Application Amp Hr. Rating
1.9L & 2.0L Information Not Available
FLUID CAPACITIES

Application Quantity
Automatic Transaxle
A/T 01M (VW ATF Or Equivalent)
Dry Fill 5.6 Qts. (5.3L)
Refill 3.2 Qts. (3.0L)
A/T 096 (Dexron II)
Dry Fill 5.9 Qts. (5.6L)
Refill 3.2 Qts. (3.0L)
Automatic Transaxle Final Drive
A/T 01M (VW ATF Or Equivalent) (1) 0.8 Qts (0.76L)
A/T 096 (SAE 75W-90, Synthetic Gear Oil) (1) 0.8 Qts. (0.76L)
Cooling System (Includes Heater)
1.9L & 2.0L 6.9 Qts. (6.5L)
Crankcase (Includes Filter)
1.9L 4.5 Qts. (4.3L)
2.0L 4.3 Qts. (4.1L)
Manual Transaxle (SAE 80W-90/API GL-4) 2.1 Qts. (2.0L)
(1) Dry fill capacity given. Use ONLY specified Oil. No oil change required.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.