1983 Volkswagen Rabbit Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Timing Belt Interference Check Menu

TIMING BELT INTERFERENCE VERIF. - PASSENGER CARS (1)

Application Engine Replacement Interval (Miles)
Cabrio
1995-96 2.0L 4-Cyl. (3) 60,000
Cabriolet
1985-89 1.8L 4-Cyl. (DOHC) (3) 60,000
1985-89 1.8L 4-Cyl. (SOHC) (3) 60,000
1990-93 1.8L 4-Cyl. (3) 60,000
Corrado
1990-92 1.8L 4-Cyl. (3) 60,000
Dasher
1976-80 (2) 1.5L 4-Cyl. Diesel (3) 60,000
1974-80 1.6L 4-Cyl. (3) 60,000
1981-80 (2) 1.6L 4-Cyl. (3) 60,000
1981-80 Diesel & Turbo Diesel (3) 60,000
Fox
1987-93 1.8L 4-Cyl. (3) 60,000
Golf
1985-88 (2) 1.6L 4-Cyl. Diesel (3) 60,000
1985-89 1.8L 4-Cyl. (DOHC) (3) 60,000
1985-93 1.8L 4-Cyl. (SOHC) (3) 60,000
1990-92 1.8L 4-Cyl. (3) 60,000
1993-96 2.0L 4-Cyl. (3) 60,000
Golf (Canadian)
1985-92 (2) 1.6L 4-Cyl. Diesel (3) 60,000
1993 1.8L 4-Cyl. (3) 60,000
GTI
1983-84 (2) 1.6L 4-Cyl. Diesel (3) 60,000
1983-84 (2) 1.6L 4-Cyl. Turbo Diesel (3) 60,000
1983-84 1.7L 4-Cyl. (3) 60,000
1983-84 1.8L 4-Cyl. (3) 60,000
1985-89 1.8L 4-Cyl. (DOHC) (3) 60,000
1983-92 1.8L 4-Cyl. (SOHC) (3) 60,000
1990-92 1.8L 4-Cyl. (3) 60,000
1990-96 2.0L 4-Cyl. (3) 60,000
GTI (Canadian)
1993 2.0L 4-Cyl. (3) 60,000
Jetta
1980 1.6L 4-Cyl. (3) 60,000
1981-92 (2) 1.6L 4-Cyl. (3) 60,000
1981-92 Diesel & Turbo Diesel (3) 60,000
1983-84 1.7L 4-Cyl. (3) 60,000
1983-84 1.8L 4-Cyl. (3) 60,000
1985-89 1.8L 4-Cyl. (DOHC) (3) 60,000
1983-92 1.8L 4-Cyl. (SOHC) (3) 60,000
1990-92 1.8L 4-Cyl. (3) 60,000
1993-96 2.0L 4-Cyl. (3) 60,000
Jetta GLI
1990-92 2.0L 4-Cyl. (3) 60,000
Passat
1990-96 2.0L 4-Cyl. (3) 60,000
Passat (Canadian)
1993 1.8L 4-Cyl. (3) 60,000
Quantum
1981-86 (2) 1.6L 4-Cyl. (3) 60,000
1981-86 Diesel & Turbo Diesel (3) 60,000
1981-84 1.7L 4-Cyl. (3) 60,000
1984-85 2.1L 5-Cyl. (3) 60,000
1983-88 2.2L 5-Cyl. (3) 60,000
1985-86 1.8L 4-Cyl. (3) 60,000
Rabbit
1974-79 1.5L 4-Cyl. (3) 60,000
1974-79 1.6L 4-Cyl. (3) 60,000
1976-80 (2) 1.5L 4-Cyl. Diesel (3) 60,000
1981-84 (2) 1.6L 4-Cyl. (3) 60,000
1981-84 Diesel & Turbo Diesel (3) 60,000
1983-84 1.7L 4-Cyl. (3) 60,000
1983-84 1.8L 4-Cyl. (3) 60,000
Scirocco
1976-79 1.5L 4-Cyl. (3) 60,000
1976-80 1.6L 4-Cyl. (3) 60,000
1983-84 1.7L 4-Cyl. (3) 60,000
1983-84 1.8L 4-Cyl. (3) 60,000
1985-89 1.8L 4-Cyl. (DOHC) (3) 60,000
1985-89 1.8L 4-Cyl. (SOHC) (3) 60,000
Scirocco (Canadian)
1989 1.8L 4-Cyl. (DOHC) (3) 60,000
1989 1.8L 4-Cyl. (SOHC) (3) 60,000
(1) Other interference engine applications may exist which are not indicated here.
(2) Interference engine. Check for possible damage to piston(s) or valve(s) if there has been a timing belt failure.
(3) Although the vehicle manufacturer does not recommend a specific scheduled maintenance interval, aftermarket belt manufacturers suggest the belt be replaced at 60,000 mile intervals.
TIMING BELT INTERFERENCE VERIF. - LIGHT TRUCKS (1)

Application Engine Replacement Interval (Miles)
Eurovan (Canadian)
1992-96 2.5L 5-Cyl. (3) 60,000
Pickup
1980 (2) 1.5L 4-Cyl. Diesel (3) 60,000
1980-83 1.6L 4-Cyl. (3) 60,000
1981-83 (2) 1.6L 4-Cyl. Diesel (3) 60,000
***** 1.7L 4-Cyl. (3) 60,000
Transporter (Canadian)
1992-96 2.5L 5-Cyl. (3) 60,000
Vanagon
1981-82 (2) 1.6L 4-Cyl. Diesel (3) 60,000
(1) Other interference engine applications may exist which are not indicated here.
(2) Interference engine. Check for possible damage to piston(s) or valve(s) if there has been a timing belt failure.
(3) Although the vehicle manufacturer does not recommend a specific scheduled maintenance interval, aftermarket belt manufacturers suggest the belt be replaced at 60,000 mile intervals.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.