1981 Triumph TR7 Automatic TransFACTORY OEM SERVICE PROCEDURE

Fuel Injection - LUCAS-BOSCH AFC Fuel Injection System: Description

NOTE: The Lucas-Bosch AFC Fuel Injection system is used on all models. Variations may exist between model applications with the addition of auxiliary control systems. This article covers the Lucas-Bosch AFC system in general, with manufacturer's differences noted.

The Lucas-Bosch Air Flow Controlled (AFC) fuel injection system is an electronically controlled system operated by incoming air flow. The AFC fuel injection system also contains a feedback system which measures oxygen content of exhaust gases and maintains the air/fuel ratio at about 14.7:1. The system consists of an electric fuel pump, fuel pressure regulator, fuel injectors, Electronic Control Unit (ECU), air flow meter, air temperature sensor, throttle switch, coolant temperature sensor, oxygen sensor (2 on TR8), 3-way catalytic converter and electrical relays. In addition, all models are equipped with a cold start system to aid in cold engine starts. The cold start system consists of an auxiliary air valve, cold start injector and thermo time switch.

Fig 1: Jaguar AFC Fuel Injection System
G09345296Courtesy of NOT AVAILABLE
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.