1976 Triumph TR6 Automatic TransFACTORY OEM SERVICE PROCEDURE

Tune-Up Specifications

CAR MODEL SPARK PLUGS CARBURETOR VALVE CLEARANCE DISTRIBUTOR No.
Type Gap Make Model Int. Exh. Point Gap Cam Angle
ALFA ROMEO  Lodge                
2000 & Alphetta HL (1) Spica Fuel Inj. .020" C .022" C .018" 60°(2) 1
ARROW  NGK     (1)          
1600 & 2000 BPR-6ES .029" Mikuni 28-32 DIDTA .006" H .010" H .020" ..... 2
AUDI  Bosch                  
Fox W215T30 .026" Bosch Fuel Inj. .010" C .018" C .016" 44-50° 3
BMW  Bosch                
2002 W145T30 .028" Solex DIDTA .007" C .007" C .016" 59-65° 4
530i & 3.0Si W145T30 .027" Bosch Fuel Inj. .011"C .011" C .014" 35-41° 5
CAPRI II  Autolite                
2300 AGRF52 .034" Mocraft 5200 (2) (2) (3) (3) 6
2800 AGR42 (1) Mocraft 2150 .014" H .016" H (3) (3) 7
COLT  NGK     (1)          
1600 & 2000 BPR-6ES .029" Mikuni 28-32 DIDTA .006" H .010" H .020" ..... 8
COURIER  Autolite                
1800 AG32A .031" Nik-Strom 2-Bbl. .009" H(1) .009" H(1) .020" 49-55° 9
DATSUN  NGK                
B210 & F10 BP5ES .033" Hitachi DCH-306 .010" C .010" C .020"(2) 49-55° 10
610 & 710 BP6ES(1) .033"(1) Hitachi DCH-340 .008" C .010" C .020"(2) 49-55° 11
Pickup BP6ES(1) .033"(1) Hitachi DCH-340 .008"C .010" C .020"(2) 49-55° 12
280Z BP6ES .030" Bosch Fuel Inj. .008"C .010" C (2) ..... 13
HONDA  NGK                
Civic BP6ES .030" Hitachi DLG-306 .005" .005" .020" 49-55° 14
Civic (CVCC) BP6ES .030" Keihin ..... .006" .006" .020" 49-55° 15
Accord BP6ES .030" Keihin ..... .006" .006" .020" 49-55° 16
JAGUAR  Champion                
XJ-6 N11Y .025" Zen Strom 175CD2SET .013" .013" (1) ..... 17
V12 N10Y .035" Bosch Fuel Inj. .013" .013" (2) ..... 18
LUV  NGK                
Pickup BPR-6ES .030" Hitachi DCP340 .006"C .010" C .018" 45-57° 19
MAZDA  NGK                
808 1300 BP-6ES-13(1) .031" Hitachi DCG-306 .010" H(2) .012" H(2) .020"(3) 49-53°(4) 20
808 1600 BP-6ES .031" Nik-Strom 2-Bbl. .012" H(2) .012" H(2) .020" 49-55° 21
B1600(9) ..... ..... ..... ..... ..... ..... ..... ..... 22
RX3(9) ..... ..... ..... ..... ..... ..... ..... ..... 23
RX4 & Cosmo B7ET .041" Nik-Strom 4-Bbl. ..... ..... .018" 55-61° 24
CAR MODEL SPARK PLUGS CARBURETOR VALVE CLEARANCE DISTRIBUTOR No.
Type Gap Make Model Int. Exh. Point Gap Cam Angle
MERCEDES BENZ  Champion                
230 N9Y .024" Zen Strom 175 CDT .004" C .008" C (3) 47° 25
280 N9Y .024" Solex 4AI .004" C(1) .010" C(1) (3) 34° 26
450 N9Y .024" Bosch Fuel Inj. (2) (2) (4) 25-39° 27
MG  Champion                
Midget N12Y .025" Zen Strom 150CD4CD .010" C .010" C (2) ..... 28
MGB N9Y .035" Zen Strom 175CD5T .013" H .013" H (2) ..... 29
OPEL  NGK                
Isuzu BPR-6ES .030" Nikki 2-Bbl. .006" .010" .018" 47-57° 30
PORSCHE  Bosch                
912E W175 M30 .028" Bosch Fuel Inj. .006" C .008" C ..... 44-50° 31
911S W235 P21 .022" Bosch Fuel Inj. .004" C .004" C .014" 35-41° 32
Carrera 3.0 W280P21 .028" Bosch Fuel Inj. .004" C .004" C ..... ..... 33
914 2.0 Litre W175T2 .028" Bosch Fuel Inj. .006" C .008" C .016" 44-50° 34
RENAULT  Champion                
R-5 L92Y .26" Weber 32DIR46 .006" C .008" C .016-.020" 55-59° 35
R-12 N9Y .26" Weber 32DARA10(4) .008"(3) .010"(3) .016-.020" 55-59° 36
R-15 N9Y .26" Weber 32DIR46 .008"(3) .010"(3) .016-020" 55-59° 37
R-17 N3 .26" Bosch Fuel Inj. .010"(3) .012"(3) .016-.020" 55-59° 38
SAAB  NGK                
99E BP6ES .026" Bosch Fuel Inj. .009" C .017" C .016" 47-53° 39
SUBARU  NGK                
1400 BP6ES .028-.031" Hitachi DCU306-7 .010" C .014" C .016-.020"(3) ..... 40
1600 BP6ES .028-.031" Hitachi DCJ306-7 .010" C .014" C .016-.020"(3) ..... 41
TOYOTA  NGK                
2T-C Engine BP5ES-L .030" Aisan 2-Bbl. .008" H .013" H .016.020" 50-54° 42
2F Engine BP5EZ .037" Aisan 2-Bbl. .008" H .014" H .016-.020" 38-44° 43
4M Engine BP5ES-L .030" Aisan 2-Bbl. .007" H .010" H .016-.020" 38-44° 44
20R Engine BP5ES-L .030" Aisan 2-Bbl. .008" H .012" H .016-.020" 50-54° 45
TRIUMPH  Champion                
Spitfire N12Y .025" Zen Strom 150CD4(4) .010" C .010" C (2) ..... 46
TR6 N9Y .025" Zen Strom 175CDSEV (1) .010" C .010" C .015" 34-38° 47
TR7 N12Y .025" Zen Strom 175CDSEVX .008" C .018" C (2) ..... 48
VOLKSWAGEN  Bosch                
Beetle W145M1 .028" Bosch Fuel Inj. .006" C .006" C .016" 44-55° 49
Transporter W145M2 .028" Bosch Fuel Inj. .006" C .006" C .016" 44-50° 50
Rabbit/Scirocco W200T30 .028" Zenith 32/32 282 .010" H .018" H .016" 44-50° 51
Dasher W215T30 .028" Bosch Fuel Inj. .009" H .017" H .016" 44-50° 52
VOLVO  Bosch                
240 Series W 175 T30 .025-.030" Bosch Fuel Inj. .015" C(1) .015" C (2) (2) 53
260 Series WA 200 T30 .024-.028" Bosch Fuel Inj. .005" C .011" C (2) (2) 54
No. IGNITION TIMING HOT IDLE FAST IDLE RPM EXHAUST CO READING At Idle Speed Remarks
Man. Trans. Auto. Trans.
1 5-7°ATDC(3) 600-700 ..... ..... 1.2% Max. (1) Surface Gap Type.
(2) Calif. Alphetta Secondary Contacts 3° retard from Primary Contacts.
(3) Calif. Alphetta TDC.
2 5°ATDC 900-1000 800-900 2000 1-2.5%(2) (1) 2000cc, 30-32 DIDTA.
(2) At 50 RPM Less than idle speed.
3 3°ATDC 850-1000 850-1000 ..... 1.5% Max.(1) (1) Calif..5% Max. & Fed. A/T 1.0% Max.
4
5
25°BTDC(1)
22°BTDC(2)
800-1000
850-1050
800-1000
850-1050
.....
.....
1-1.5%(3) (4)
1.5-3.0%(3)
(1) 2000 RPM Fed.; 2800 RPM Calif.
(2) 1700 RPM Fed.; 2700 RPM Calif.
(3) With AIR disconnected.
(4) 1.5-3.0% Calif.
6
7
(1)
(1)
(1)
(1)
(1)
(1)
1800
1600
(1)
(1)
(1) See Tune-Up Decal.
(2).035-.055" w/Lifter Collapsed.
(3) Bosch Breakerless Ign.
8 5°ATDC 900-1000 800-900 2000 1-2.5%(2) (1) 2000c, 30-32 DIDTA
(2) At 50 RPM Less Than Idle Speed.
9 5°ATDC 700-750 700-750 (2) 1.5% Max.(3) (1) Camshaft Side.
(2) See Carb. Section.
(3) 2-3% Calif. M/T.
10
11
12
13
10°BTDC(3) (4)
12°BTDC(3)
12°BTDC(5)
7°BTDC
700
750
750
800
650(3)
650(3)
650(3)
700(3)
2550(6)
2000(7)
2000(7)
.....
1-3%
1-3%
1-3%
.....
(1) Calif. BP6ES-11 w/.041" Gap.
(2) Air Gap.008-.016".
(3) A/T in "D".
(4) B210 Calif. M/T-8°BTDC.
(5) Calif. M/T-7°BTDC.
(6) A/T-2800 RPM.
(7) A/T-2400 RPM.
14
15
16
7°BTDC
2°BTDC(1)
2°BTDC(2)
750-850
800-900
750-850
700-800
700-800
630-730
.....
3000(3)
3000
1.5% Max.
0.1-0.4%
0.1-0.4%
(1) Wagon with A/T-TDC
(2) A/T TDC.
(3) A/T 2700.
17
18
8°BTDC(3)
10°BTDC(3)
.....
.....
750
750
..... 2-4.5%(4)
1-2%(4)
(1)Air Gap.014-.016".
(2) Air Gap.020-.022".
(3) At idle.
(4) With AIR disconnected.
19 6°BTDC 900 900 ..... .....  
20
21
22
23
24
7°BTDC(5)
5°BTDC(8)
.....
.....
5°ATDC(10)
700-750
800-850
.....
.....
700-750
.....
800-850
.....
.....
700-750
(6)
(6)
.....
.....
3250(6)
0.3-1%(7)
1.5% Max.(7)
.....
.....
0.1% Max.
(1) Calif. BP-6ES.
(2) Rocker-to-Valve Stem.
(3) Fed. Air Gap.013".
(4) Fed. Preset.
(5) Calif. 11°BTDC.
(6) See Carb. Section.
(7) Calif. 1.5-2.5% ahead of CAT.
(8) Calif. 8°BTDC.
(9) Not available at Publication Time.
(10) Leading; Trailing 16-24°ATDC.
No. IGNITION TIMING HOT IDLE FAST IDLE RPM EXHAUST CO READING At Idle Speed Remarks
Man. Trans. Auto. Trans.
25
26
27
10°BTDC
7°BTDC
TDC
800-900
.....
.....
800-900
800-900
700-800
1600-1800
1700-1900
.....
1%Max.(5)
.4-1.5%(5)
.2-1.5%(5)
(1)280S-.006" Int.;.012" Exh.
(2) Hydraulic Lifters.
(3) See Tune-Up Decal.
(4) Breakerless Ignition.
(5) Without AIR.
28
29
2°ATDC
10°BTDC(5)
700-900
750-950
.....
.....
1700-1900
(4)
.5-3.5%
4.5-6.5%(3)
(1)Calif. 150CD4VT
(2) AirGap.014"-.016"
(3) With AIR Disconnected & Plugged.
(4) See Carb Section.
(5) At 1500 RPM.
30 6°BTDC 675-725 675-725 (1) ..... (1) See Carb. Section.
31
32
33
34
27°BTDC(4)
5°ATDC(1)
5°ATDC(5)
27°BTDC(6)
875-975
850-950
850-900
850-950
.....
900-1000
900-1000
.....
.....
.....
.....
.....
5-1.2%(3)
2-3.5%(2)
1-3%
1-3%
(1) At 900 RPM with vacuum.
(2) With AIR disconnected and plugged.
(3) 875-975 RPM.
(4) At 3500 RPM without vacuum.
(5) At 850 RPM with vacuum.
(6) At 2500 RPM with vacuum.
35
36
37
38
TDC(2)
7°BTDC(2) (7)
7°BTDC(2) (7)
12°BTDC
750-850
800-900
800-900
800-900
.....
625-675 (5)
625-675 (5)
.....
1400-1600
1500
1500
.....
.5-3%(1)
1-4%(6)
1-4%(6) (8)
1-3%
(1) 2.5% Preferred.
(2) At idle RPM.
(3) Hot or Cold.
(4) DARAII with A/T.
(5) In Drive.
(6) 3% Preferred.
(7) 10°BTDC with A/T.
(8).5-3% Calif.
39 14°BTDC(1) 850-900 850-900 ..... 1.5-2.0% (1)Calif. 12°BTDC
40
41
8°BTDC
8°BTDC
900-1000
.....
850-950
.....
(1)
(1)
.015-.55%(2)
.015-.55%(2)
(1) With throttle valve open 19°.
(2) With AIR connected.5-1.5%.
(3) Damper spring gap.002-.018".
42
43
44
45
10°BTDC
7°BTDC
10°BTDC(2)
8°BTDC
800-900
700-800
750-850
800-900
800-900
.....
700-800
800-900 3000(1)
1800
2600(3)
2400
.....
.....
.....
.....
(1) 2700 Calif.
(2)5°BTDC Calif.
(3) 2400 Calif.
46
47
48
2°ATDC
4°ATDC
2°ATDC
700-900
700-900
700-900
.....
.....
.....
1700-1900
.....
1500-1700 .5-2.5%
1-3%
1-2%(3) (1)Calif. 175CD4VT.
(2) Pickup coil air gap.014-.016".
(3) Calif..5-3%.
(4) Calif. 150CD4VT.
49
50
51
52
5°ATDC(1)
5°ATDC
3°ATDC
3°ATDC
800-950
850-950
850-1000
850-1000
850-1000
900-1000
850-1000
850-1000
(2)
(2)
(2)
(2)
2.0%
2.0%
1.5%(3)
1.5%(4)
(1) With A/T, TDC.
(2) See tune-up decal.
(3) Ahead of CAT.
(4) Calif..5%. Fed A/T 1.0%.
53
54
15°BTDC
10°BTDC
900
900
800
900
.....
.....
2±.3%
1.7 ±.3%
(1).017" with engine hot.
(2) Electronic Ignition.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.