2025 Toyota Land Cruiser BaseFACTORY OEM SERVICE PROCEDURE

Lighting System

LIGHTING SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

DTC Code Description
B1244-00 Light Sensor Circuit Malfunction
B241A-1C Rear Height Sensor Circuit Voltage Out of Range
B242C-04 Headlight Control Module (Sub) System Internal Failure
B242D-04 Headlight Control Module (Main) System Internal Failure
B242E-14 IG Circuit Short to Ground or Open
B242E-14 IG Circuit Short to Ground or Open
B242F-14 ECUB Circuit Short to Ground or Open
B242F-14 ECUB Circuit Short to Ground or Open
B2439-00 Headlight LH Circuit
B243A-00 Headlight RH Circuit
U0100-87 Lost Communication With ECM/PCM "A" Missing Message
U0100-87 Lost Communication with ECM/PCM "A" Missing Message
U0101-87 Lost Communication with TCM Missing Message
U0101-87 Lost Communication with TCM Missing Message
U0111-87 Lost Communication with Battery Energy Control Module "A" Missing Message
U0126-87 Lost Communication with Steering Angle Sensor Module Missing Message
U0126-87 Lost Communication with Steering Angle Sensor Module Missing Message
U0129-87 Lost Communication with Brake System Control Module Missing Message
U0129-87 Lost Communication with Brake System Control Module "A" Missing Message
U0129-87 Lost Communication with Brake System Control Module "A" Missing Message
U0131-87 Lost Communication with Power Steering Control Module "A" Missing Message
U0140-87 Lost Communication with Body Control Module Missing Message
U0140-87 Lost Communication with Body Control Module Missing Message
U0151-87 Lost Communication with Restraints Control Module Missing Message
U0155-87 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message
U0155-87 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message
U0155-87 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message
U0163-87 Lost Communication with Navigation Control Module Missing Message
U0164-87 Lost Communication with HVAC Control Module Missing Message
U0168-87 Lost Communication with Vehicle Security Control Module Missing Message
U0199-87 Lost Communication with "Door Control Module A" Missing Message
U0200-87 Lost Communication with "Door Control Module B" Missing Message
U0208-87 Lost Communication with "Seat Control Module A" Missing Message
U0230-87 Lost Communication with Rear Gate Module Missing Message
U023A-87 Lost Communication with Image Processing Module "A" Missing Message
U023B-87 Lost Communication with Image Processing Module "B" Missing Message
U0241-87 Lost Communication with Headlamp Control Module "A" Missing Message
U0241-87 Lost Communication with Headlamp Control Module "A" Missing Message
U0242-87 Lost Communication with Headlamp Control Module "B" Missing Message
U0265-87 Lost Communication with Image Processing Sensor A Missing Message
U0269-87 Lost Communication with Image Processing Sensor E Missing Message
U1000-49 CAN Register Fixing Internal Electronic Failure
U1000-49 CAN Register Fixing Internal Electronic Failure
U1104-87 Lost Communication with Cruise Control Module Missing Message
U1106-87 Lost Communication with Electric Parking Brake Module Missing Message
U1107-87 Lost Communication with Power Management Module Missing Message
U1110-87 Lost Communication with Clearance Sonar Module Missing Message
U1115-87 Lost Communication with Tilt & Telescopic Module Missing Message
U1117-87 Lost Communication with Accessory Gateway Missing Message
U114F-87 Lost Communication with Power Integration Module Missing Message
U114F-87 Lost Communication with Power Integration Module Missing Message
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.