2017 Toyota Sienna SEFACTORY OEM SERVICE PROCEDURE

Cruise Control System

CRUISE CONTROL SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION [12/2015 - 08/2016]

DTC Code Detection Item Trouble Area See reference
P0500 Vehicle Speed Sensor Malfunction - Vehicle speed sensor
- Vehicle speed sensor signal circuit
- Combination meter assembly
- ECM
Refer to DTC P0500: Vehicle Speed Sensor Malfunction; DTC P0503: Vehicle Speed Sensor "A" Intermittent / Erratic / High [12/2015 - 08/2016]
P0503 Vehicle Speed Sensor "A" Intermittent / Erratic / High - Vehicle speed sensor
- Vehicle speed sensor signal circuit
- Combination meter assembly
- ECM
Refer to DTC P0500: Vehicle Speed Sensor Malfunction; DTC P0503: Vehicle Speed Sensor "A" Intermittent / Erratic / High [12/2015 - 08/2016]
P0571 Brake Switch "A" Circuit - Stop light switch
- Stop light switch circuit
- ECM
Refer to DTC P0571: Brake Switch "A" Circuit [12/2015 - 08/2016]
P0575 Cruise Control Input Circuit - ECM Refer to DTC P0575: Cruise Control Input Circuit [12/2015 - 08/2016]
CRUISE CONTROL SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION [08/2016 - 11/2017]

Dtc Code Description
P050013 Vehicle Speed Sensor "A" Circuit Open
P05001F Vehicle Speed Sensor "A" Circuit Intermittent
P057113 Brake Switch "A" Circuit Open
P057162 Brake Switch "A" Signal Compare Failure
P057504 Cruise Control System Internal Failure
P057549 Cruise Control Internal Electronic Failure
CRUISE CONTROL SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION [11/2017 - ]

Dtc Code Description
P050013 Vehicle Speed Sensor "A" Circuit Open
P05001F Vehicle Speed Sensor "A" Circuit Intermittent
P057113 Brake Switch "A" Circuit Open
P057162 Brake Switch "A" Signal Compare Failure
P057504 Cruise Control System Internal Failure
P057549 Cruise Control Internal Electronic Failure
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.